washer jets
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2009
Location: nottingham
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
washer jets
Hi guys my washers packed up working a couple of weeks ago. I cleaned them out and now have the drivers side working but not passengers side. Does anyone know where I can get a new set from as all I can find on eBay are chrome led ones. It's a 54 plate blob.
#2
Scooby Regular
iTrader: (1)
Main dealers?
Although on my classic i changed to a fan style set
http://www.ebay.co.uk/itm/Genuine-Fi...d=588232486283
small discussion here https://www.scoobynet.com/scoobynet-...r-classic.html
Although on my classic i changed to a fan style set
http://www.ebay.co.uk/itm/Genuine-Fi...d=588232486283
small discussion here https://www.scoobynet.com/scoobynet-...r-classic.html
#3
Scooby Regular
iTrader: (2)
I bought some of those fan ones.....about 6 months ago.........haven't got round to fitting them yet........
I would think a main dealer will be your only bet for standard ones.
Try soaking the old ones in some paintbrush cleaner over night, then rinse in boiling water and blow out from the front....never blow through, just drives the muck deeper into the jets.
I would think a main dealer will be your only bet for standard ones.
Try soaking the old ones in some paintbrush cleaner over night, then rinse in boiling water and blow out from the front....never blow through, just drives the muck deeper into the jets.
#5
Scooby Regular
Join Date: Apr 2010
Location: Birmingham
Posts: 2,482
Likes: 0
Received 0 Likes
on
0 Posts
I changed mine to ones from a Citreon something.... anyway the spray pattern is actually a misty pattern and spreads the washer fluid evenly around the window.
Trending Topics
#9
Scooby Regular
iTrader: (5)
Got some small plastic washer from B&Q from the plumbing section, filed them down one end and a bit in the middle to give them a slant, sprayed them matte black fitted them under the washer jet!
Now the washer jets fire must a bit higher up and better when at 60mph+
Took a few goes to get the position just right
Now the washer jets fire must a bit higher up and better when at 60mph+
Took a few goes to get the position just right
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM