JDM STI Hatch Advise
#1
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
JDM STI Hatch Advise
Need some help,
I've imported a 2008 JDM hatch originally was to sell but after driving it i really can't sell so have decied to sell my 62 plate Merc and run hatch has an everyday car.
Tricky part is its completely standard so i need advise on were to start and recommend any decent tuners in Manchester area
First want to start with Exhaust and Mapping/ fuel mapping etc
Also will be ordering some wheels either bronze Rays CE28n or TE37sl in black not sure on size 18 or 19 been told 19 will affect drive.
Nice subtle dump valves, anything else ?
I've imported a 2008 JDM hatch originally was to sell but after driving it i really can't sell so have decied to sell my 62 plate Merc and run hatch has an everyday car.
Tricky part is its completely standard so i need advise on were to start and recommend any decent tuners in Manchester area
First want to start with Exhaust and Mapping/ fuel mapping etc
Also will be ordering some wheels either bronze Rays CE28n or TE37sl in black not sure on size 18 or 19 been told 19 will affect drive.
Nice subtle dump valves, anything else ?
#2
Scooby Senior
iTrader: (34)
Cams at Darwen, prosport at Stockport or tegsport are all reputable and in your area. If you want to venture to the right side of the Pennines then I'd say Richard Henry at Bradford.
Wheel wise I'd stick with 18s as 19s will compromise ride and handling. Dump valve wise stick to the original recirc.
Wheel wise I'd stick with 18s as 19s will compromise ride and handling. Dump valve wise stick to the original recirc.
#3
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Cams at Darwen, prosport at Stockport or tegsport are all reputable and in your area. If you want to venture to the right side of the Pennines then I'd say Richard Henry at Bradford.
Wheel wise I'd stick with 18s as 19s will compromise ride and handling. Dump valve wise stick to the original recirc.
Wheel wise I'd stick with 18s as 19s will compromise ride and handling. Dump valve wise stick to the original recirc.
#6
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
4.Turbo-back including Hi-Flow Sports Cat
Requires a Stage 2 ECU remap
Consists of:
Tailpipe Style:
1 x Downpipe (Jap-spec 2.0T)
1 x Hi-Flow Sports Catalyst Assembly
1 x Centre section
1 x Rear Silencer
1 x LH Tailpipes Twin 90mm Jet
1 x RH Tailpipes Twin 90mm Jet
Pipe Ø: 3.00" (76.20mm) *
How to Buy
Of Miltek website
Requires a Stage 2 ECU remap
Consists of:
Tailpipe Style:
1 x Downpipe (Jap-spec 2.0T)
1 x Hi-Flow Sports Catalyst Assembly
1 x Centre section
1 x Rear Silencer
1 x LH Tailpipes Twin 90mm Jet
1 x RH Tailpipes Twin 90mm Jet
Pipe Ø: 3.00" (76.20mm) *
How to Buy
Of Miltek website
#9
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#10
Scooby Regular
These are rare cars in the UK...... don't **** it up!
Miltek Exhaust
Uprated panel filter
EcuTEK RACEROM remap
This will get you around 350bhp.
Leave everything else on the engine STANDARD!
Miltek Exhaust
Uprated panel filter
EcuTEK RACEROM remap
This will get you around 350bhp.
Leave everything else on the engine STANDARD!
#11
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#13
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#15
Scooby Regular
I can't say who is best.... I haven't tried them all.
The fitment of the parts is easy..... it's the mapping that needs the expert. Personally I'd use Tracktive Solutions or Bob Rawle for EcuTEK stuff (which is from personal experience).
The fitment of the parts is easy..... it's the mapping that needs the expert. Personally I'd use Tracktive Solutions or Bob Rawle for EcuTEK stuff (which is from personal experience).
#18
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#19
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
#21
Scooby Regular
Thread Starter
Join Date: Dec 2013
Location: bury
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts