Front bumper removal(Bug)
25 February 2018, 05:59 PM
#1
Front bumper removal(Bug)
Hi All, firstly apologies if this has been covered before 
But can anyone give me a step by step guide to removing my Bugs front bumper please? or if there has been a previous post point me in the right direction please, i would be very grateful for any help many thanks
But can anyone give me a step by step guide to removing my Bugs front bumper please? or if there has been a previous post point me in the right direction please, i would be very grateful for any help many thanks
25 February 2018, 08:58 PM
#2
Scooby Regular
it should be similar to by blob.
Remove the headlights and grille using a trim tool and 10mm socket,
turn the wheels to 1 side and peel away the arch liner to access the fitting between the wing and bumper.
Push the plastic screw from the top while using a philips screwdriver and pop it out
undo the arch liner clips from underneath and along the top with trim tool
The bumper should then pull away, make sure you unplug the foglights if required.
Thats roughly how we did mine for fmic fitting
Remove the headlights and grille using a trim tool and 10mm socket,
turn the wheels to 1 side and peel away the arch liner to access the fitting between the wing and bumper.
Push the plastic screw from the top while using a philips screwdriver and pop it out
undo the arch liner clips from underneath and along the top with trim tool
The bumper should then pull away, make sure you unplug the foglights if required.
Thats roughly how we did mine for fmic fitting
26 February 2018, 02:53 PM
#4
Scooby Regular
Thread
Thread Starter
Forum
Replies
Last Post
Jyates
General Technical
2
31 May 2015 07:33 PM