Just a quick one (story of my life) ;)
#1
Thinking about it afterwards, i would guess (or hope!) the reason toby's was ticking over so poorly when you (MD) and the guy from PE jumped in it and started it, they didnt wait for the fuel pump to prime and give it 10 seconds or so to let the ecu do its self test, forgetting to do that can sometimes lead to lumpy idle.
as for 'high power levels'.......er ok md if you say so
[Edited by ptholt - 10/6/2002 3:19:42 PM]
as for 'high power levels'.......er ok md if you say so
[Edited by ptholt - 10/6/2002 3:19:42 PM]
#3
Just a quick thankyou to all those involved with the PE rr day today
Nice to see some of the old faces, and of course nice to meet some new ones too
Thanks to the person who pointed out that my car was 'leaking' on the rollers....it was just the fmic water spray
Thanks to Toby for not slating my fmic too much, and Lets hope he gets that idle problem sorted
Mervyn said he had never seen such good intake temps as with my car, I told him it was a DIY fitted Pace, he agreed they are very good
Mega, dont be too p1ssed off mate, as I said, on the road your car is as quick as mine even with the B&H butts stuck in the top mount
Thanks again all, and nice to meet you Ian...good luck with your insurance 'claim'
Oh, and Hello to Top Cat Moe , I promise I'll look after the bonnet scoop mate
Moles Dad and Mole.
Nice to see some of the old faces, and of course nice to meet some new ones too
Thanks to the person who pointed out that my car was 'leaking' on the rollers....it was just the fmic water spray
Thanks to Toby for not slating my fmic too much, and Lets hope he gets that idle problem sorted
Mervyn said he had never seen such good intake temps as with my car, I told him it was a DIY fitted Pace, he agreed they are very good
Mega, dont be too p1ssed off mate, as I said, on the road your car is as quick as mine even with the B&H butts stuck in the top mount
Thanks again all, and nice to meet you Ian...good luck with your insurance 'claim'
Oh, and Hello to Top Cat Moe , I promise I'll look after the bonnet scoop mate
Moles Dad and Mole.
#5
I was only running 'low' settings today
283bhp and 277lbs torque, not too bad for a TD04L (small turbo).
There were a few with higher figures, but I dont know if they were UK models ???
Cheers for now, ps I answered your ic post
283bhp and 277lbs torque, not too bad for a TD04L (small turbo).
There were a few with higher figures, but I dont know if they were UK models ???
Cheers for now, ps I answered your ic post
#6
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
MY93wrx 317bhp... 290lb/ft..@1.15 bar
Not the best though, i had to leave at about 2 and someone before ran with a linked STI V ran 321bhp.. Sorry mate didnt catch your name??
What did everyone else get??
Top Day and as usual Top people!!
Rob
Not the best though, i had to leave at about 2 and someone before ran with a linked STI V ran 321bhp.. Sorry mate didnt catch your name??
What did everyone else get??
Top Day and as usual Top people!!
Rob
#7
Scooby Regular
Join Date: Oct 2001
Location: Here, there and everywhere
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Well done andy, 283 bhp from a UK is good going.
what did john get out of his then? was there much in it.
I need to get mine on the rollers again, last time i got 261 bhp. I would like to see what im getting now with a full decat.
cheers
chris
what did john get out of his then? was there much in it.
I need to get mine on the rollers again, last time i got 261 bhp. I would like to see what im getting now with a full decat.
cheers
chris
Trending Topics
#8
Hello Chris, John did ok...not much in it, but he had a boost issue that he needs to 'fine tune'.
Nice to 'hear' from you, reckon you will be near us on bhp with the de-cat
I am looking 'round now to see what I can sell to finance my new turbo
Cheers, Andy.
Nice to 'hear' from you, reckon you will be near us on bhp with the de-cat
I am looking 'round now to see what I can sell to finance my new turbo
Cheers, Andy.
#10
Have to say actually toby's car did seem to tick over spectacularly bad even for a link car, the only time mine was that bad was after the first map i'd ever had on cold start as its a bit hard to map for cold engine after youd driven all the way to bobs lol.
#11
Wocha Pete
Yeah, I related the effect to that of my MAF failure...but as we all know, no MAF on that car
I dont think that was cold map, all the temps were still up (?)
Anyway, when you get into the high power levels like Toby, you have to expect a few eccentricities
Nice to see you again Pete and Mrs. Pete and Mini Petes
Cheers.
Yeah, I related the effect to that of my MAF failure...but as we all know, no MAF on that car
I dont think that was cold map, all the temps were still up (?)
Anyway, when you get into the high power levels like Toby, you have to expect a few eccentricities
Nice to see you again Pete and Mrs. Pete and Mini Petes
Cheers.
#12
Scooby Regular
Join Date: May 2001
Location: Scotland
Posts: 4,580
Likes: 0
Received 0 Likes
on
0 Posts
I was expecting more, and I think I already know why I didn't get more
The running order kinda went up the swanny, but I managed to "push" my way into the timeslot allocated to me, had an EVO in the way I didn't think was listed as running, but a bit of a nifty manoeuvre sorted that one
MD you were flaming everytime on lift off on the M25
Thanks Merv for doing the 1.25mm restrictor for me
The running order kinda went up the swanny, but I managed to "push" my way into the timeslot allocated to me, had an EVO in the way I didn't think was listed as running, but a bit of a nifty manoeuvre sorted that one
MD you were flaming everytime on lift off on the M25
Thanks Merv for doing the 1.25mm restrictor for me
#13
Scooby Regular
Join Date: Feb 2001
Location: Hemel Hempstead
Posts: 7,953
Likes: 0
Received 0 Likes
on
0 Posts
The running order kinda went up the swanny, but I managed to "push" my way into the timeslot allocated to me, had an EVO in the way I didn't think was listed as running, but a bit of a nifty manoeuvre sorted that one
P
#15
Pete, no-one told me I had to wait 10sec for the ecu to do its stuff, If I had known it was a 'moody' ecu I wouldnt have touched it
High power? of course its high power....higher than my old UK
Maybe the next rr day will have a 'sign in' and number system...it could remove the 'hes in front of me' and 'he pushed in' problems associated with not having a 'system'.
Lets face it, when people have organised their day to be at the rr for a specific time slot and then find themselves being pushed further and further down the list due to some other people thinking that their presence is 'more important'....well, it just goes to prove that just because you drive a Scoob or an Evo you might not be the genuine person that people thought you were/are.
Anyroadup I had a good day, and thanks again!
Moles Dad, time slot 11-00 - 13-00.
High power? of course its high power....higher than my old UK
Maybe the next rr day will have a 'sign in' and number system...it could remove the 'hes in front of me' and 'he pushed in' problems associated with not having a 'system'.
Lets face it, when people have organised their day to be at the rr for a specific time slot and then find themselves being pushed further and further down the list due to some other people thinking that their presence is 'more important'....well, it just goes to prove that just because you drive a Scoob or an Evo you might not be the genuine person that people thought you were/are.
Anyroadup I had a good day, and thanks again!
Moles Dad, time slot 11-00 - 13-00.
#16
Maybe the next rr day will have a 'sign in' and number system...it could remove the 'hes in front of me' and 'he pushed in' problems associated with not having a 'system'.
I wasn't quite expecting almost all 30 cars to arrive within about an hour of each other!
The last time I organised a day it worked really well like that with having small groups arriving together. Still we live we learn, and we know what to do different next time.
All in all was a very good day, finished up with a meal afterwards.
Once again apologies if I didn't say hello to you or was a bit anti-social I wasn't actually feeling well, and was also feeling TOTALLY gutted that I was unable to run my car
Was good to meet a few of you guys from Kent, Mega_Stream, Moles Dad, etc... also good to see a fwe old faces I haven't seen for a while too!
Ian
#17
OK Ian
As I understood it you was not gonna be there till later as you had 'other things' to attend to
Thats why the running order went a bit 'tilt'
Dont take my comments as a negative slant on the day, as I said...it was a very good day, maybe, as you said, with two million cars turning up together it was gonna be a bit difficult having no sign-in etc
I am, and I'm sure I speak for all, very sorry for you not being able to run your car...theres always next time
Anyway, thanks for the positive reply Ian, and yes, It was good to meet you too
Cheers.
As I understood it you was not gonna be there till later as you had 'other things' to attend to
Thats why the running order went a bit 'tilt'
Dont take my comments as a negative slant on the day, as I said...it was a very good day, maybe, as you said, with two million cars turning up together it was gonna be a bit difficult having no sign-in etc
I am, and I'm sure I speak for all, very sorry for you not being able to run your car...theres always next time
Anyway, thanks for the positive reply Ian, and yes, It was good to meet you too
Cheers.
#18
Scooby Regular
Join Date: Sep 2000
Location: London
Posts: 7,039
Likes: 0
Received 0 Likes
on
0 Posts
Just having a running order written down usually seems to work fine. Twas a shame to miss it but I got a new car, courtesy of Powerstation and some handling parts and spent the afternoon being ferried about in a 360 - can't complain really
Matt
Matt
#20
MD If you listen when you turn your ignitiion on you'll here a little buzzing noise.
According to some of the more technical chaps, you should let that buzz complete before starting regardless of link or not
a few extra seconds just to make sure don't hurt, even the std ecu has to check all its sensors as soon as you turn the ignition on.
According to some of the more technical chaps, you should let that buzz complete before starting regardless of link or not
a few extra seconds just to make sure don't hurt, even the std ecu has to check all its sensors as soon as you turn the ignition on.
#21
Pt, when I turn on my ignition I hear the boost controller, the HIDs and the radar detector
I will take your advice re the 'pause'....bit difficult when you suffer from 'impatientitus'
If it makes my car any quicker, I'll do it !!! Anything to get big power like Toby
(lol as I type)
I will take your advice re the 'pause'....bit difficult when you suffer from 'impatientitus'
If it makes my car any quicker, I'll do it !!! Anything to get big power like Toby
(lol as I type)
#22
big power, tee hee.
would it surprise you if i said that (excluding that pesky evo6 of pocs ) that yesterday was the lowest set of results i've seen on a RR shootout day!
would it surprise you if i said that (excluding that pesky evo6 of pocs ) that yesterday was the lowest set of results i've seen on a RR shootout day!
#23
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
For anyone that noticed that my name wasnt on the list one of the listed people asked me if i wanted to take their place as they couldnt run, wont name names but you could probably work it out by who run and who didnt...
Sorry if i upset anyone by taking their place...
Rob
I was on and off quickly though
Sorry if i upset anyone by taking their place...
Rob
I was on and off quickly though
#24
Scooby Regular
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
MD I can slate your cardboard fmic if you like? :P hehehe
It was a good day, I didnt have any trouble going on the rollers, bit of a queue but nothin heavy, was there a few hours and it was a good laugh, especially at Fulhams pants pulling techniques lol
It was a good day, I didnt have any trouble going on the rollers, bit of a queue but nothin heavy, was there a few hours and it was a good laugh, especially at Fulhams pants pulling techniques lol
#25
Scooby Regular
Join Date: Jun 2002
Location: The home of the game played with odd shapped balls
Posts: 2,037
Likes: 0
Received 0 Likes
on
0 Posts
I was amazed that the car put out 283bhp.
When I was buying the car I had been told it was running at 270 bhp. When I got the car it had the standard twin pipe exhaust, but the pics had shown a larger back box, also the car was Overboosting so I had to have it tweaked back a bit to cure the overboost. On the day off the test I would have been happy with 250bhp taking all these things into account.
On its 1st run which they lost the graph the car made 285bhp so I had to run again which gave 276bhp merv wasnt happy with the test so they went again and got this 283bhp.
Have to say it was a great day I was listed as a 11 am group but didnt get on till well into the afternoon.
Still milling around and chatting is what makes these things worth it. Who cares when you run aslong as you do
OH and Im glad my wallett was nearly empty as I could have spent a fair amount on the day, Discounts on FM intercoolers, Silicon Hoses, Suspension parts tuning packs ect and to cap it all free tea and coffee. Thanks to IanW and Everyone @ Power Engineering.
When I was buying the car I had been told it was running at 270 bhp. When I got the car it had the standard twin pipe exhaust, but the pics had shown a larger back box, also the car was Overboosting so I had to have it tweaked back a bit to cure the overboost. On the day off the test I would have been happy with 250bhp taking all these things into account.
On its 1st run which they lost the graph the car made 285bhp so I had to run again which gave 276bhp merv wasnt happy with the test so they went again and got this 283bhp.
Have to say it was a great day I was listed as a 11 am group but didnt get on till well into the afternoon.
Still milling around and chatting is what makes these things worth it. Who cares when you run aslong as you do
OH and Im glad my wallett was nearly empty as I could have spent a fair amount on the day, Discounts on FM intercoolers, Silicon Hoses, Suspension parts tuning packs ect and to cap it all free tea and coffee. Thanks to IanW and Everyone @ Power Engineering.
#26
Pete, no it wouldnt suprise me at all....I have seen lots of posts quoting much higher figures.
Anyway, at least mines on the 'up' and going the right way
Krade, I agree...very good day, same bhp figure as me
Regards.
Anyway, at least mines on the 'up' and going the right way
Krade, I agree...very good day, same bhp figure as me
Regards.
#28
Got 249....Happy with that.
Great day. Cheers Ian and all the PE guys. Ian, don't forget that you need to sort out Karyns wonky stickers.
Best bit of the day: karyn's face when her car was on the rollers......pricless.
Fantom......Milk 1 sugar please.
Krade.....Saw you in the layby on the way out. I hope you were on the phone and not broken down.
Great day. Cheers Ian and all the PE guys. Ian, don't forget that you need to sort out Karyns wonky stickers.
Best bit of the day: karyn's face when her car was on the rollers......pricless.
Fantom......Milk 1 sugar please.
Krade.....Saw you in the layby on the way out. I hope you were on the phone and not broken down.
#30
Scooby Senior
iTrader: (1)
next time im gonna have to get my name down.
I could've just jumped in the queue and made out I was 'invited', but that wouldnt've been cricket would it
Mega, as MD says, on the motorway home both of you were quick 70-100, so quick I didnt get my foot down in time
Bruuddy Jag driver in my way for 3miles!!
I could've just jumped in the queue and made out I was 'invited', but that wouldnt've been cricket would it
Mega, as MD says, on the motorway home both of you were quick 70-100, so quick I didnt get my foot down in time
Bruuddy Jag driver in my way for 3miles!!