Colour coding : how long to do the painting?
#1
Colour coding : how long to do the painting?
If there were three experienced body workers with all the kit etc., would it be possible to colour code the sills, mirrors, handles on a "classic" impreza in approx just over 24hrs and do a "proper" job?
#3
Thanks for the reply Mr Gee (only 1 of 46 views!)
I guess with plastic it doesnt get baked?
I was just surprised that enough layers could be applied and rubbed down and applied and laquered and rubbed etc in that amount of time!
I guess with plastic it doesnt get baked?
I was just surprised that enough layers could be applied and rubbed down and applied and laquered and rubbed etc in that amount of time!
Last edited by Molds; 02 August 2004 at 11:00 AM.
#5
Cheers guys. I am having some work done by a garage with a good rep on SN. However, I was worried that they had done these bits so quickly that they would have needed to cut corners. I am not a paint expert and it sounds like I am just worrying over nothing. I'll stop fretting now and look forward to seeing her in all her new painted glory next weekend
#6
Scooby Regular
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
yes it could.. and you dont need an oven to do it in that time..
2 pack primers have a pretty short 'air dry' drying time..
You dont need to put loads of paint on them and rub them down.. I would use a plastic primer and a 2k spray filler primer if it was me.. then paint and lacquer.. job done at home in a day.
Do a search for "U-pol paint rocket" if you dont have a day.
or speak to scoobyclinic.
David
2 pack primers have a pretty short 'air dry' drying time..
You dont need to put loads of paint on them and rub them down.. I would use a plastic primer and a 2k spray filler primer if it was me.. then paint and lacquer.. job done at home in a day.
Do a search for "U-pol paint rocket" if you dont have a day.
or speak to scoobyclinic.
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
29 December 2015 12:07 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 08:03 AM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 11:49 AM