Squeeky wheel...
#1
Squeeky wheel...
I have a sqeeky wheel but not sure which it is?
It may sound silly but the squeeky wheel when driving very slowly is more prominent than driving over 10MPH. Over the weekend I was coming home at 1.30am and when turning corners and bends at 15 - 25 MPH I could hear a kind of birring or a very low drone type sound coming from one of the rear corners... (sounded like towards the arch / wheels area).
Are these 2 related, what could it be and what can do about this pls.
Thanks in advance
It may sound silly but the squeeky wheel when driving very slowly is more prominent than driving over 10MPH. Over the weekend I was coming home at 1.30am and when turning corners and bends at 15 - 25 MPH I could hear a kind of birring or a very low drone type sound coming from one of the rear corners... (sounded like towards the arch / wheels area).
Are these 2 related, what could it be and what can do about this pls.
Thanks in advance
#3
Confused...
Originally Posted by Neutral Cruiser
I have the same non-descript noise. I suspect it is worn suspension.
Probably forgot to mention that its a Classic 95' WRX with 56.000 on the clock. If it is worn suspension, how can I check this and is this an expensive repair...
Sorry for ignorance, how is the squeeking and burring sound related to suspension... some have told me it is bearings?
I really don't know?
Trending Topics
#8
Originally Posted by StickyMicky
wheel bearing
just had one of mine done this morning
just had one of mine done this morning
I obviously know very little...
#9
is it like a humming noise.
cos i remember on my golf i had the same problem and it was the bearings. Cant remember properly but it cost me around 45 quid ish for a new bearing so dont know what it will cost on the scooby.
cos i remember on my golf i had the same problem and it was the bearings. Cant remember properly but it cost me around 45 quid ish for a new bearing so dont know what it will cost on the scooby.
Thread
Thread Starter
Forum
Replies
Last Post
markyptinting
General Technical
7
21 January 2011 08:36 PM