http://mywebpages.comcast.net/fdimer...es/5k20-17.JPG

Hope the link works. Can you buy these STi corner covers cos they look the nuts. Don't want to have to replace my whole front bumper just for the side covers, didn't know if there is a company that makes them?
My car's a 2005 WRX
Would apprecaite any help on the matter.

 

They are available from any main dealer and come already colour coded.

Quite reasonably priced too I think,however you may have to cut some slots in your wrx bumper inorder to fit them.

many have done it,I'm sure someone will be along shortly with proper details

 

There is a set here currently going for €51

http://cgi.ebay.de/SUBARU-IMPREZA-WR...QQcmdZViewItem

and only 4 hours remaining.

 

£110 from your main dealer with SIDC discount.

Allan

 

http://bbs.scoobynet.co.uk/showthread.php?t=404350

 

I bought these for my WRX, £110 from the dealer sounds about right.

They only come in STi colours though (hence I had to have the set i bought sprayed red).

Dead easy to fit - i didnt need to cut any holes in my WRX bumper either. On the corner pieces (they are called 'airdam skirts' btw) you need to take off the two top tabs (stanley knife) then remove the clip holders down the leading edge - i used a drill, but was very careful not to go right through the part!

Fitted them in under an hour. Make sure you order the 6 clips & bolts you need if ordering from a dealer. The skirts are fixed by 3 bolts at each side, into existing holes in the bumper.

 

Thank you every one for your input

 

My 04 WRX with Sti corner splitters and fog covers.

http://photobucket.com/albums/y16/sc...Picture040.jpg