What do you think of the SECS Monitor ??
#2
Scooby Regular
Join Date: Aug 2004
Location: Stella Brewery
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
I like mine (got a bit cheaper from someone on here
).
Wouldn't be without it, especially as I can keep an eye on the knock correct while I'm having to run it on **** petrol coz I couldn't find Optimax.
Worth it IMHO
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
Wouldn't be without it, especially as I can keep an eye on the knock correct while I'm having to run it on **** petrol coz I couldn't find Optimax.
Worth it IMHO
#6
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Im planning on buying one in the new year.
Wt things is it unable to display because of the ECU? Iv gt all my info so far off scoobyworld.
Would you guys mind posting a couple of pic as all the ones Ive seen have been very small?
Wt things is it unable to display because of the ECU? Iv gt all my info so far off scoobyworld.
Would you guys mind posting a couple of pic as all the ones Ive seen have been very small?
Trending Topics
#12
Scooby Regular
Join Date: Aug 2004
Location: Stella Brewery
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
Sorry for the delay - went out and drank the national debt of a small African country after work yesterday ![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
http://img.photobucket.com/albums/v435/TDT/IM000024.jpg
http://img.photobucket.com/albums/v435/TDT/IM000031.jpg
Fitted it myself in about 5 minutes (and I don't take things to bits coz I always end up with bits left over).
The only problem I have had, is getting hold of PSI3. They appear to not answer the phone and ignore email.
Other than that, well worth the money!
![Big Grin](https://www.scoobynet.com/images/smilies/biggrin.gif)
http://img.photobucket.com/albums/v435/TDT/IM000024.jpg
http://img.photobucket.com/albums/v435/TDT/IM000031.jpg
Fitted it myself in about 5 minutes (and I don't take things to bits coz I always end up with bits left over).
The only problem I have had, is getting hold of PSI3. They appear to not answer the phone and ignore email.
Other than that, well worth the money!
Last edited by TDT; 01 January 2006 at 10:11 AM.
#13
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
dont have any pics on this comp
but i have put it in the centre like tdt's one but i moved my stereo on top of the dash ans put a pocket in, the most difficult part of fitting is fishing the cable down throu the dash. so that tells you how difficult it is
but i have put it in the centre like tdt's one but i moved my stereo on top of the dash ans put a pocket in, the most difficult part of fitting is fishing the cable down throu the dash. so that tells you how difficult it is
#14
Scooby Regular
iTrader: (2)
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
My unit was bought used from the Scooby net for sale forum. It can display the following data, but is not recieving data to display.
Intake Temperature
Ignition Point (Deg BTDC)
Knock correction
AFR
Air Flow Mass
Exhaust Gas Temp
Oil Pressure
Oil Temp
(Both the oil paramters require extra sensors to be installed and connected)
The unit is installed in a UK Turbo 2000 (MY00) with the AE802 ECU.
If anyone is running the same unit in a car with the same ECU and getting values out for these parameters, i'd like to hear from them.
**goes off to find the manual**
PSI3 will upgrade the software on your unit to the latest release for a small amount (about £20 + Carriage IIRC)
TT
Intake Temperature
Ignition Point (Deg BTDC)
Knock correction
AFR
Air Flow Mass
Exhaust Gas Temp
Oil Pressure
Oil Temp
(Both the oil paramters require extra sensors to be installed and connected)
The unit is installed in a UK Turbo 2000 (MY00) with the AE802 ECU.
If anyone is running the same unit in a car with the same ECU and getting values out for these parameters, i'd like to hear from them.
**goes off to find the manual**
PSI3 will upgrade the software on your unit to the latest release for a small amount (about £20 + Carriage IIRC)
TT
#15
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
What is it like to view in bright sunlight?
I like the new blue vfd ones but can't decide if the extra cost is worth it.
Also I've heard that the ecutek one is a bit different from the psi ones even though psi make them. Apparently it allows user switchable maps and parameters with an ecutek remap. Don't know if the psi one will do that.
Would prefer the psi one as the ecutek vfd is green and it will clash with my pioneer head that is blue.
I like the new blue vfd ones but can't decide if the extra cost is worth it.
Also I've heard that the ecutek one is a bit different from the psi ones even though psi make them. Apparently it allows user switchable maps and parameters with an ecutek remap. Don't know if the psi one will do that.
Would prefer the psi one as the ecutek vfd is green and it will clash with my pioneer head that is blue.
#18
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
From ecutek lol
Check the website.
Any ecutek dealer can order them.
They are slightly more expensive than the standard psi ones and have a green vfd instead of blue or lcd.
Both types claim to have user tuneable options (dependant on the ecu) but an ecutek dealer told me that ecutek said the normal psi ones aren't as adjustable or dont access as much stuff.
Both web sites claim the same spec (they would, they are both made by psi) so the cynic in me wants to know the difference. Are ecutek just trying it on so I buy theirs as I'd rather have a blue psi one?
Check the website.
Any ecutek dealer can order them.
They are slightly more expensive than the standard psi ones and have a green vfd instead of blue or lcd.
Both types claim to have user tuneable options (dependant on the ecu) but an ecutek dealer told me that ecutek said the normal psi ones aren't as adjustable or dont access as much stuff.
Both web sites claim the same spec (they would, they are both made by psi) so the cynic in me wants to know the difference. Are ecutek just trying it on so I buy theirs as I'd rather have a blue psi one?
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Mister:E
Subaru Parts
2
24 September 2015 01:37 PM