Tony MY03WRX

Hi all

Just purchased this gauge from fleebay and it has no instruction with it

Has any of the helpful Scoobynet people got a copy of the instructions I can borrow or a link to where it might be lurking on the net.



Many thanks in advance

Tony

wrx-kris

havent got instructions but they are all fitted the same. what bits did you get with it?

Tony MY03WRX

Hi Kris

The bits I got are the gauge complete with black tube, yellow and black wire. The mounting bracket and 2 screws.

I think i have found were to plumb the boost pipe to



I'm just missing the T piece(Hafrauds maybe???).

I take it the Yellow and black wires are the +ve & -ve for the dash light, where should I take the feeds from.

and my last question where do I cut the steering column to mount the gauge and route the pipe and wires???

Many thanks

Tony

ethanrob

iTrader: (3)

You best bet for the live and earth feed would to tap into the fog light switch wire's on the panel down to the right of your steering wheel
For the t-piece i would surgest any motor factor's,they cost about 50 pence a piece

mark

Tony MY03WRX

All fitted thanks for the advice


Tony