dump valve problem
#1
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
dump valve problem
Hi im tottaly new to the scoob's so bare with me, i have just bought a TK M20B subaru impreza wrx94,,which is about 300bhp,to 350 bhp, it has a baily's dump valve fitted ,now the problem is when it works it makes a funny sound not like a dump valve should,i have been told it is because it is not big enough for the engine, but i dont think that is the problem, im thinking of taking it off but im not sure on how the pipes go to put it back to normall, pics would be great ,or is it best to keep a dump valve on it, and if so which is the best one to put on,
any advice would be great ,
oh and i have 3 pods 1 oil preasure,1 oil temp and a 3rd which im not sure of all i know is that when it reaches 10 i have to change gear as when i go over the 10 the engine sound crap
please feel free to take the p**s
any advice would be great ,
oh and i have 3 pods 1 oil preasure,1 oil temp and a 3rd which im not sure of all i know is that when it reaches 10 i have to change gear as when i go over the 10 the engine sound crap
please feel free to take the p**s
Last edited by wannascoobydoo; 04 March 2006 at 01:16 AM.
#3
Originally Posted by wannascoobydoo
all i know is thet when it reaches 10 i have to change gear as when i go over the 10 the enginge sound crap
please feel free to take the p**s
please feel free to take the p**s
aka cocklink
#5
sounds like u need dump valve with higher psi rating if ur running 350 bhp. Above ten psi u must be getting some detention be careful that can destroy ur engine in seconds, what fuel do u use.You need a dump valve to protect turbo from stalling
#6
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95blackWRX
sounds like u need dump valve with higher psi rating if ur running 350 bhp. Above ten psi u must be getting some detention be careful that can destroy ur engine in seconds, what fuel do u use.You need a dump valve to protect turbo from stalling
#7
u dont waqnt it lower than ten 14.7psi is a bar of boost so ur not getting all out ur car if it runs 350
a knocklink will tell u if it is det or get a garage to check with det cans. my car was doing that and was cured with a set of coils
what type of fuel do u use
how high have u had the boost
a knocklink will tell u if it is det or get a garage to check with det cans. my car was doing that and was cured with a set of coils
what type of fuel do u use
how high have u had the boost
Trending Topics
#10
Originally Posted by wannascoobydoo
anyone
or go back to standard recirculating, or by a better dv. Standard baileys dv are not stong enough for modded cars. Phone baileys and ask em yourself. Obvoisly your not willing to listen to my advise
#11
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95blackWRX
u dont waqnt it lower than ten 14.7psi is a bar of boost so ur not getting all out ur car if it runs 350
a knocklink will tell u if it is det or get a garage to check with det cans. my car was doing that and was cured with a set of coils
what type of fuel do u use
how high have u had the boost
a knocklink will tell u if it is det or get a garage to check with det cans. my car was doing that and was cured with a set of coils
what type of fuel do u use
how high have u had the boost
#12
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sharpydoo
YOU....WILL....NEED....TO.....CONTACT......BAILIEY S.....AND.....HAVE.....DV......UPGRADED
or go back to standard recirculating, or by a better dv. Standard baileys dv are not stong enough for modded cars. Phone baileys and ask em yourself. Obvoisly your not willing to listen to my advise
or go back to standard recirculating, or by a better dv. Standard baileys dv are not stong enough for modded cars. Phone baileys and ask em yourself. Obvoisly your not willing to listen to my advise
#15
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kingofturds
Ok mate, if you still have your standard re circ dv, then all you need to do is place it back in between those 2 black pipes and where that nice piece of blue pipe is job done although i cant see the factyou are running 300 bhp should cause your dv many probs
#19
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I Got this m8 just 2 days ago but i really wanted just a normal wrx not this tommy kiarra wrx, But i guess i have wanted a subaru for some time i just took this, its a nice car but its bouncy as hell and to fast up the box for my likes but it sticks like f***in glue needs a t cut and a set of better wheels but it will do till i get a normal wrx
http://bbs.scoobynet.co.uk/showthread.php?t=496965
http://bbs.scoobynet.co.uk/showthread.php?t=496965
Last edited by wannascoobydoo; 04 March 2006 at 01:30 AM.
#22
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95blackWRX
fast up the box cause of power change ur springs it has been lowered that will inprove the ride nice car tho
so how high has ur boost gone to
so how high has ur boost gone to
#24
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95blackWRX
has it evr gone higher than 10 what does it go to in 5th when flat out
the subaru is all new s**t to me but what a nice car they are
Last edited by wannascoobydoo; 04 March 2006 at 01:38 AM.
#25
yeah it sounds as if it is pinking bad detanation mb caused by the fuel run optimax if ur staying below ten ur missing out on what the car can really do what is the sound like do u know when the spark plugs and coils were changed
#26
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
I think they were changed about 1 month ago m8, its ok up to the 10 after that it seems as though its restricted, maybe a good thing saves getting a new engine ,the engine was rebuilt recently i have the bill for £2500,
here is a pic off engine , its spottless compared to the pic
here is a pic off engine , its spottless compared to the pic
Last edited by wannascoobydoo; 04 March 2006 at 01:52 AM.
#29
Scooby Regular
Thread Starter
Join Date: Jan 2006
Location: County Durham
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 95blackWRX
have u taken it up to any speed in 5th say on motorway when u go above ten does the engine make noise if so what kind of noise if u go above ten what does the boost gauge do
Last edited by wannascoobydoo; 04 March 2006 at 01:57 AM.
#30
is it 10 or 1.0 u should be able to hold car on full boost in 3rd 4th and 5th no problem instead of lifting of when u get to ten i have a thought to what it could be but is the gauage 1.0 or 10