minty

iTrader: (1)

Ok so here's something to make you laugh, while i cry......

I'm putting the wirig loom back into my scooby after a complete shell re-spray but am hoping to test this without the engine in place.

1st question i guess.... Is it possible ??

The main lead from the battery conects to the starter motor and the earth obviously earths to the body earthing points, but....

Where does the rest of the wiring loom get it's Juice from ???

What am i missing ???

Thanks
Chris.

Criss

Alternator would be anothe good starting point to bump the voltage up a fair bit!

minty

iTrader: (1)

so the juice for the loom is taken from the alternator then through the circuit to the battery. mmm so i guess it cant be tested without the engine :/

minty

iTrader: (1)

That cant make sense actually as there is no power at the ignition barrel and it needs that in order to start the car to then make the alternator work ....so...where's the missing connection to the power ??????????????

ru'

No idea what car you have, but this may help???

http://206.13.93.15/STi_Stuff/STi_Manual/sti_dir.htm

minty

iTrader: (1)

there is plenty there to see if it is any use, thanks for that link ru.

Minty.