island991

lots of threads on this but i cant find one about fitting. Bought a secondhand one (tight git i know) and has no instructions. Held it up to car this morning and cant for the life of me see where it screws in/fits.

anyone got close up pics or instructions for a classic MY00.

Squizz

Check here:
http://freespace.virgin.net/michael....4/splitter.htm

island991

cheers for that. still cant see where it screws too??

jd5217

will the fixing be similar to a newage, if so you can inspect mine if you want.

island991

could be. im gonna take the scoop off this eve and have a look. if i cant work it out ill take you up on that. cheers

jd5217

no problems

island991

ok been looking. do i need to drill into the plate below the scoop?? anyone?

AC-scoobie

There is a black metal plate under the scoop that comes off (unscrews), then you screw the splitter to this, may need to drill it, depending on what screws you use.

island991

so how far forward to i need to put it?

richiewong

Had to do this on my classic, drilled and screwed to i/c backplate.

AC-scoobie

From memory, as far forward as it goes so the edges of the splitter sit flush with the edges of the plate.

island991

will the screws get in the way of the i/c rubber seal??

island991

does this position look ok?


its tricky without instructions!!

island991

??

island991

ah well it worked i think!! although im about to take it off again.......when screwing it up i thought, hmmm, put the nice looking allen heads of the screws on the inside so when bonnet it up it looks better. did it all shut bonnet and realised you can see the back of the screws and nuts in the scoop.........bugger!

Welloilbeefhooked

iTrader: (3)

Thats spot on mate. Exactly where I had mine.