Just had my power fc mapped!
#1
Thread Starter
Scooby Regular
Joined: Aug 2002
Posts: 2,570
Likes: 0
From: Wickford, Essex - GamerTag - lCE
Just had my power fc mapped!
Finally got my 94 WRX running some good power
Unfortunately the 540cc Sard injectors I bought wouldn't seal properly so I had to keep the 380's but still managed to fuel for 1.3 bar and I don't want to go higher than that. Car feels so much faster! I'm well impressed.
Just need to get on some rollers now and see what it gets. Hoping for about 330.
Still got a massive grin on my face
Steve
Unfortunately the 540cc Sard injectors I bought wouldn't seal properly so I had to keep the 380's but still managed to fuel for 1.3 bar and I don't want to go higher than that. Car feels so much faster! I'm well impressed.
Just need to get on some rollers now and see what it gets. Hoping for about 330.
Still got a massive grin on my face
Steve
#3
If you want bigger injectors flat4online do a good set for £300.
My mate who has a 94 wrx had his remapped by jollygreenmonster a couple of weeks ago with the new injectors and i don't think they run over 75% duty.
Mapped to 1.3bar as well
My mate who has a 94 wrx had his remapped by jollygreenmonster a couple of weeks ago with the new injectors and i don't think they run over 75% duty.
Mapped to 1.3bar as well
Last edited by myblackwrx; 16 September 2006 at 09:12 AM.
#4
Thread Starter
Scooby Regular
Joined: Aug 2002
Posts: 2,570
Likes: 0
From: Wickford, Essex - GamerTag - lCE
It was mapped by Jollygreenmonster.
I'm not gonna bother upgrading the injectors now, I'm quite happy with how the car is and didn't want to run anymore boost than 1.3bar.
Just gonna sell the injectors for a loss and see if someone else can get them to seal. Think maybe my fuel rail is a bit buggered or something as two of my standard injectors were leaking fuel into the cylinder.
Just need to sort out my hks evc now as it keeps making a beep sound and restricting boost when I am giving it large in high gears. I've set the cut limit to 1.5bar but it's still cutting boost even though i'm running only 1.3bar. Gonna reset the unit and run the learning mode and start from scratch.
Steve
I'm not gonna bother upgrading the injectors now, I'm quite happy with how the car is and didn't want to run anymore boost than 1.3bar.
Just gonna sell the injectors for a loss and see if someone else can get them to seal. Think maybe my fuel rail is a bit buggered or something as two of my standard injectors were leaking fuel into the cylinder.
Just need to sort out my hks evc now as it keeps making a beep sound and restricting boost when I am giving it large in high gears. I've set the cut limit to 1.5bar but it's still cutting boost even though i'm running only 1.3bar. Gonna reset the unit and run the learning mode and start from scratch.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM