pic request.......single din stereo
28 January 2007 | 06:33 PM
#1
Thread Starter
Scooby Regular
iTrader: (3)
Joined: Dec 2003
Posts: 1,372
Likes: 0
From: hudds or the nurburgring ;)
pic request.......single din stereo
hey peeps, any chance of pics of single din stereo in a newage? i want to take out my double din ubit and fit a single mp3 player.
how hard is it and where do you get other bit from?
how do they fasten in.
all help appreciated, thanks
how hard is it and where do you get other bit from?
how do they fasten in.
all help appreciated, thanks
28 January 2007 | 06:36 PM
#2
Twatful
Joined: Apr 2003
Posts: 9,050
Likes: 0
From: Grew up and don't drive Scoobs anymore!
28 January 2007 | 06:43 PM
#3
Scooby Senior
Joined: Sep 2003
Posts: 2,600
Likes: 0
From: Essex
dipster
28 January 2007 | 07:08 PM
#6
Twatful
Joined: Apr 2003
Posts: 9,050
Likes: 0
From: Grew up and don't drive Scoobs anymore!
Here's mine housing Defi controller and mini Ipod.
Forester pocket with flap cost's about £15 and may require drilling of the side brackets to fit.
Silver Pocket Assy CTR with spring lid No 66128SA000
Forester pocket with flap cost's about £15 and may require drilling of the side brackets to fit.
Silver Pocket Assy CTR with spring lid No 66128SA000
Trending Topics
28 January 2007 | 07:15 PM
#8
Twatful
Joined: Apr 2003
Posts: 9,050
Likes: 0
From: Grew up and don't drive Scoobs anymore!
Pocket is an exact match.
The original double din is held in by a load of crews in the front and 2 smal metal brackets attached to the sides.
You need to unscrew these brackets and attach then to the the new single din. There should be various predrilled holes already in the brackets and the screws you removed should fit into the din.
The pocket has plastic lugs that locate into holes of the bracket, occasionally the bracket won't have the correct placed holes so out with the drill and Bob's your uncle.
It's all in the FAQ
The original double din is held in by a load of crews in the front and 2 smal metal brackets attached to the sides.
You need to unscrew these brackets and attach then to the the new single din. There should be various predrilled holes already in the brackets and the screws you removed should fit into the din.
The pocket has plastic lugs that locate into holes of the bracket, occasionally the bracket won't have the correct placed holes so out with the drill and Bob's your uncle.
It's all in the FAQ
Last edited by richiewong; 28 January 2007 at 07:17 PM.
29 January 2007 | 08:58 AM
#15
Scooby Regular
Joined: Sep 2006
Posts: 313
Likes: 0
From: Cheshire
The newage is really simple if you check out the link the FAQ there is how to remove the surround and install a new unit.
So you found all the info you needed then... 
Thread
Thread Starter
Forum
Replies
Last Post