Wiring diagrams fuel pump issue
07 April 2007, 11:07 AM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2007
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Wiring diagrams fuel pump issue
I fitted some new dials yesterday to my car and after I had finished and put everything back how it was the car will not start. I have been told that the fuel pump is not pushing fuel to the engine. Any ideas? Also does anyone have any wiring diagrams for the car.???
Mike
Mike
07 April 2007, 11:16 AM
#2
Have you checked the fuse m8
Seems odd that you had the clocks out and now it wont start ?
NorthUrsalia.com: Wiring Diagrams And ECU Pinouts
Seems odd that you had the clocks out and now it wont start ?
NorthUrsalia.com: Wiring Diagrams And ECU Pinouts
Last edited by morpheous; 07 April 2007 at 11:18 AM. Reason: link added
07 April 2007, 11:23 AM
#3
Scooby Regular
Join Date: Aug 2002
Location: Northamptonshire
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem with mine a couple of days ago, not because i took any dials out though, mine just stopped working.
It turned out to be the connector underneath the back seat, on the drivers side. One of the wires had a loose connection so i snipped it both sides of the connector and used a terminal bloke to reconnect.
Sounds more like you've disturbed something removing the dials though but at least its something else to check.
Hope it helps.
Matt
It turned out to be the connector underneath the back seat, on the drivers side. One of the wires had a loose connection so i snipped it both sides of the connector and used a terminal bloke to reconnect.
Sounds more like you've disturbed something removing the dials though but at least its something else to check.
Hope it helps.
Matt
07 April 2007, 11:33 AM
#4
Scooby Regular
Thread Starter
Join Date: Mar 2007
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem with mine a couple of days ago, not because i took any dials out though, mine just stopped working.
It turned out to be the connector underneath the back seat, on the drivers side. One of the wires had a loose connection so i snipped it both sides of the connector and used a terminal bloke to reconnect.
Sounds more like you've disturbed something removing the dials though but at least its something else to check.
Hope it helps.
Matt
It turned out to be the connector underneath the back seat, on the drivers side. One of the wires had a loose connection so i snipped it both sides of the connector and used a terminal bloke to reconnect.
Sounds more like you've disturbed something removing the dials though but at least its something else to check.
Hope it helps.
Matt
Thanks mate going to check that now as i have had my back seats up
Thread
Thread Starter
Forum
Replies
Last Post
hedgecutter
General Technical
3
25 September 2015 02:35 PM