ecu advise !!!!
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
ecu advise !!!!
i have a impreza sport converted to a turbo,the engine its self its out of an sti ,buti went to get it remapped but it isnt possible cos its got a 1996 uk ecu and loom ,just wondering if there is any alternative apart from buying an apexi power fc as i havnt got the cash at the moment to even buy one lol let me no ppl ,thanks
i was thinking of getting a second hand sti ecu and loom will this work ??
i was thinking of getting a second hand sti ecu and loom will this work ??
#4
Scooby Regular
Join Date: Aug 2005
Location: North West
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
#5
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Version 3 is from 9/96 on.. ie. 96 is on the change over..
how many plugs does the ecu have? 4plug then it can be mapped.
3 plug and therefore a version 3 and correct it cannot be mapped and the sti and uk engines are different (cams, turbo etc) and would could fit an sti ecu to sort the problem.. you would need to swap pins in the ecu uk loom though.
but it is easy to explain which need swithcing if you go down that road.
is the car up and running?
Simon
how many plugs does the ecu have? 4plug then it can be mapped.
3 plug and therefore a version 3 and correct it cannot be mapped and the sti and uk engines are different (cams, turbo etc) and would could fit an sti ecu to sort the problem.. you would need to swap pins in the ecu uk loom though.
but it is easy to explain which need swithcing if you go down that road.
is the car up and running?
Simon
#6
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
no not at the min bottom ends getting recon will be running next week i hope
yes it is the 3 pin ecu , i can get hold of a sti ecu and loom ,but i get lost wen it comes to wires nd electrics
wot would i have to do ? would it be the case of joining wires or just plug in
aprieciate replys mate !
yes it is the 3 pin ecu , i can get hold of a sti ecu and loom ,but i get lost wen it comes to wires nd electrics
wot would i have to do ? would it be the case of joining wires or just plug in
aprieciate replys mate !
#7
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
then you have been told correct the original ecu cannot be remapped.. plug in replacement like PowerFC if you want it mapped.
The crank and the cam sensor pins on the ecu loom need swapping and the fuel pump relay pin moved.
Are you 100% sure you have an STi3 engine?
Simon
The crank and the cam sensor pins on the ecu loom need swapping and the fuel pump relay pin moved.
Are you 100% sure you have an STi3 engine?
Simon
Trending Topics
#9
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
when they remove the cams to remove the heads / refit them remove a valve bucket and you will know if it is an sti3 engine if they look like this
cams2.jpg @ Fotopic.Net
ie. the bucket is smooth on the sides and has the little shim under it.. just make sure you put the shim back in!! if the bucket has a groove in the side etc then it is a wrx/uk engine with hydraulic tappets.
Simon
cams2.jpg @ Fotopic.Net
ie. the bucket is smooth on the sides and has the little shim under it.. just make sure you put the shim back in!! if the bucket has a groove in the side etc then it is a wrx/uk engine with hydraulic tappets.
Simon
#10
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2007
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
yeap its a uk wrx its up at as performance but they found the bores are too worn just for piston rings to be fitted )
i dont no wot to do now i just want a reliable 300 - 320 bhp scooby
wot engine would suit me best ?
i have £1000 budget im not sure if il even manage it
the mods i had on my car was a fmic , induction kit , greaham goode flywheel ap racing clutch ,yellow injectors unsure of size ,walbro fuel pump nd got a vf35 in house waiting to be fitted . bought it to fit then get mapped but obviously cant even do it on my ecu
do you think i should take my ecu out now nd just change it all together for an earlier or later ecu that i can get remmapped cos i havnt really got the £££££ for an apexi p fc
let me no wot you think thanks
i dont no wot to do now i just want a reliable 300 - 320 bhp scooby
wot engine would suit me best ?
i have £1000 budget im not sure if il even manage it
the mods i had on my car was a fmic , induction kit , greaham goode flywheel ap racing clutch ,yellow injectors unsure of size ,walbro fuel pump nd got a vf35 in house waiting to be fitted . bought it to fit then get mapped but obviously cant even do it on my ecu
do you think i should take my ecu out now nd just change it all together for an earlier or later ecu that i can get remmapped cos i havnt really got the £££££ for an apexi p fc
let me no wot you think thanks
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM