Notices
ScoobyNet General General Subaru Discussion

Noises after std exhaust replacement (WR1) Opinions pls

Thread Tools
 
Search this Thread
 
Old 15 December 2007, 05:10 PM
  #1  
P1_BEN
Scooby Regular
Thread Starter
 
P1_BEN's Avatar
 
Join Date: Apr 2002
Location: Kent
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default Noises after std exhaust replacement (WR1) Opinions pls

Hi All,

Recently had a replacement exhaust fitted to my WR1 and now get a loud high pitched noise at full throttle about 4.5k on in any gear. Not to exaggerate but it really does sound like a jet engine of some description..! I don't really want to attract anymore attention to the car than I need to. plus it just sounds wrong...

Some claims it's down to slight a change in exhaust design but just not comfortable that it should sound like it does. The dealer is waiting to hear from prodrive on this apparently, but that was over a week ago and still not heard anything as yet..

Any opinions or has anyone else experienced this?

Also waiting for my fathers company to take a look, as they provide independent vehicle inspections to several manufacturers and insurance companies etc....

PS, this is all under warranty so keen to make sure it is how it should be!
Old 15 December 2007, 08:30 PM
  #2  
davedipster
Scooby Senior
 
davedipster's Avatar
 
Join Date: Sep 2003
Location: Essex
Posts: 2,600
Likes: 0
Received 0 Likes on 0 Posts
Default

Could it be surge? Mike Wood did say on here that changing the exhaust on a ppp'd car can cause this or simular conditions that can cause some damage to the engine.
Old 15 December 2007, 08:32 PM
  #3  
davedipster
Scooby Senior
 
davedipster's Avatar
 
Join Date: Sep 2003
Location: Essex
Posts: 2,600
Likes: 0
Received 0 Likes on 0 Posts
Default

something to do with the lack of back pressure causing surge.
Old 15 December 2007, 08:57 PM
  #4  
P1_BEN
Scooby Regular
Thread Starter
 
P1_BEN's Avatar
 
Join Date: Apr 2002
Location: Kent
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi Dave, thanks for the comments...? don't suppose you could clarify what you mean by surge?

Thought it would be the same as it's like for like replacement..?
Old 15 December 2007, 09:09 PM
  #5  
Luminous
Scooby Regular
iTrader: (3)
 
Luminous's Avatar
 
Join Date: Aug 2004
Location: Muppetising life
Posts: 15,449
Likes: 0
Received 0 Likes on 0 Posts
Default

Does it sound like the pressure release valve on pressure cooker? If so its the wastegate. Either you are making too much boost, or its cutting in early.

If you don't get the answers you want, take it to somewhere else that knows what they are on about. Just ask on here and say where you are in the country.
Old 15 December 2007, 11:42 PM
  #6  
Anders_WR1
Scooby Regular
iTrader: (8)
 
Anders_WR1's Avatar
 
Join Date: Nov 2004
Location: Surrey
Posts: 1,405
Likes: 0
Received 0 Likes on 0 Posts
Default

Hello Ben,

It could be overboost, if you've changed the exhaust to a decat without a remap. A decat might cause boost creep too, where the boost keeps rising if your on a high speed run.

Which zorst did you fit?

Have you checked out www.wr1oc.co.uk ?

Cheers

Anders
Old 16 December 2007, 08:38 AM
  #7  
P1_BEN
Scooby Regular
Thread Starter
 
P1_BEN's Avatar
 
Join Date: Apr 2002
Location: Kent
Posts: 460
Likes: 0
Received 0 Likes on 0 Posts
Default

Sorry guys, maybe I didn't explain myself very well, the exhaust is a standard exhaust from prodrive replaced under warranty. That's why the dealer was going to check with prodrive to see if they knew why there would be a problem.
Old 16 December 2007, 11:05 AM
  #8  
Granby
Scooby Regular
iTrader: (5)
 
Granby's Avatar
 
Join Date: Feb 2004
Location: S E London........ 555 Wagon Sqn
Posts: 5,387
Likes: 0
Received 0 Likes on 0 Posts
Default

I got that sort of noise when i put a bung in the tailpipe to quieten it down, i assume the noise was there because the bung had a smaller diameter pipe than the rest of the system so the pressure of the exiting gases was making that noise, if it's a standard replacement system then everything should be the same, sorry i know not much help but i thought i'd just share it anyway
Old 20 December 2007, 05:35 PM
  #9  
markm3006
Scooby Regular
 
markm3006's Avatar
 
Join Date: Sep 2006
Location: aberdeenshire
Posts: 110
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by P1_BEN
Sorry guys, maybe I didn't explain myself very well, the exhaust is a standard exhaust from prodrive replaced under warranty. That's why the dealer was going to check with prodrive to see if they knew why there would be a problem.
Why would you change the prodrive/scorpion exhaust if it was stainless steel under warranty ? What was wrong with the original one ?
Old 20 December 2007, 06:43 PM
  #10  
rcwhite
Scooby Regular
 
rcwhite's Avatar
 
Join Date: Jul 2005
Posts: 804
Likes: 0
Received 0 Likes on 0 Posts
Default

YouTube - subaru spec c htlaets sound like this but with a bit more burble. this is ear pleasure not viewing pleasure.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Ravimal3
General Technical
9
22 September 2015 06:44 AM
Decayes
ScoobyNet General
5
11 September 2015 07:47 PM



Quick Reply: Noises after std exhaust replacement (WR1) Opinions pls



All times are GMT +1. The time now is 11:24 PM.