thegambler

I have a 96 djm wrx with uprated fuel pump fmic and apexi ecu. Have just bought a bigger turbo - td05 18g and 550 injectors.

Before i get them fitted and remapped i have been advised to get a nissan z32 maf sensor???? Where might i get one of these? nissan dealer?? is it worthwhile and what would it do? Also, would it take much moddification to fit on the car

Thanks in advance

scott

Fantom

This post needs to go in General Technical.

340BHP-WRX

iTrader: (6)

I got my Z32 MAF from ebay. Try the Nissan breakers aswell. Make sure you get the plug with the maf aswell.

Yes it's worthwhile changing to the Z32 maf as the standard maf tops out at about 1.45 bar iirc but the Z32 can handle higher boost,not sure how much higher though.

It's fairly easy to fit,just a case of cutting the original maf plug off the car and re-wiring to the plug on the Z32.

Z32 connector has 6 pins labelled A to F:
A - Not connected
B - MAF Output Signal
C - Gnd
D - Gnd
E - +12V
F - Not connected

Subaru 92-96 MAF Connector has 5 pins:
1 - +12V
2 - Gnd
3 - Sensor Gnd
4 - MAF Signal
5 - Not connected