JollyGreen Remap at SurreyRollingroad
11 January 2008, 06:01 PM
#1
Scooby Regular
Thread Starter
Join Date: May 2005
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
JollyGreen Remap at SurreyRollingroad
Many rhanks to Simon of Jollygreenmonster.co.uk and Charlie at Surrey Rolling road for a fantastic remap on my SubaruPPP Sti. MY05 uk
Went for the Ecutek remap after much deliberation and nearly parted with well over 2k at CR subaru when all I needed to do was get the ECU
remapped.
Car started off at about 298bhp before map, which I was quite pleased about as I had heard most were around the 285 mark.
Simon got the car to 340.6 bhp which was better than we all expected. Charlie and Simon said that it was the most they had seen from a standard car PPP car. It certainly felt like 340 on the way home..the thing bloody flies.
great service and highly recommended.
many thanks to scoobynet members for pointing me in the right direction and saving me some cash too!!
Tif
Went for the Ecutek remap after much deliberation and nearly parted with well over 2k at CR subaru when all I needed to do was get the ECU
remapped.
Car started off at about 298bhp before map, which I was quite pleased about as I had heard most were around the 285 mark.
Simon got the car to 340.6 bhp which was better than we all expected. Charlie and Simon said that it was the most they had seen from a standard car PPP car. It certainly felt like 340 on the way home..the thing bloody flies.
great service and highly recommended.
many thanks to scoobynet members for pointing me in the right direction and saving me some cash too!!
Tif
12 January 2008, 12:07 AM
#6
Scooby Regular
Join Date: May 2004
Location: in motoring nirvana.....
Posts: 2,443
Likes: 0
Received 0 Likes
on
0 Posts
Simon's a jolly green fella - I mean jolly nice fella - as is Charlie too 
We were all nicely suprised when we achieved 504bhp after the last remap by Simon at Surrey RR
We were all nicely suprised when we achieved 504bhp after the last remap by Simon at Surrey RR
Trending Topics
12 January 2008, 12:40 AM
#9
Scooby Regular
iTrader: (4)
Join Date: Aug 2005
Location: Also known as The Gimp
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Great results mate it has to be said. Is it the 2.5 engine running just PPP???
I was going to pop down to SRR to see Charlie boy and Simon today but ran out of time to get there.
Steve
I was going to pop down to SRR to see Charlie boy and Simon today but ran out of time to get there.
Steve
12 January 2008, 08:24 AM
#10
Scooby Regular
Thread Starter
Join Date: May 2005
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
12 January 2008, 11:30 AM
#14
Scooby Regular
iTrader: (1)
Join Date: Aug 2007
Location: All over the shop....
Posts: 895
Likes: 0
Received 0 Likes
on
0 Posts
Many rhanks to Simon of Jollygreenmonster.co.uk and Charlie at Surrey Rolling road for a fantastic remap on my SubaruPPP Sti. MY05 uk
Went for the Ecutek remap after much deliberation and nearly parted with well over 2k at CR subaru when all I needed to do was get the ECU
remapped.
Car started off at about 298bhp before map, which I was quite pleased about as I had heard most were around the 285 mark.
Simon got the car to 340.6 bhp which was better than we all expected. Charlie and Simon said that it was the most they had seen from a standard car PPP car. It certainly felt like 340 on the way home..the thing bloody flies.
great service and highly recommended
many thanks to scoobynet members for pointing me in the right direction and saving me some cash too!!
Tif
Went for the Ecutek remap after much deliberation and nearly parted with well over 2k at CR subaru when all I needed to do was get the ECU
remapped.
Car started off at about 298bhp before map, which I was quite pleased about as I had heard most were around the 285 mark.
Simon got the car to 340.6 bhp which was better than we all expected. Charlie and Simon said that it was the most they had seen from a standard car PPP car. It certainly felt like 340 on the way home..the thing bloody flies.
great service and highly recommended
many thanks to scoobynet members for pointing me in the right direction and saving me some cash too!!
Tif
12 January 2008, 03:02 PM
#15
Scooby Regular
Thread Starter
Join Date: May 2005
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
no mods no filters nothing...standard UK car with PPP on delivery from new.
Simon charged £650 for the Ecutek remap and It was £70 for the RR session.
Not a bad bang per buck rate!
Just took the car out now and it really feels good pulling noticably harder in virtually every gear. 3rd is even more insane.
Simon charged £650 for the Ecutek remap and It was £70 for the RR session.
Not a bad bang per buck rate!
Just took the car out now and it really feels good pulling noticably harder in virtually every gear. 3rd is even more insane.
12 January 2008, 05:47 PM
#18
Scooby Regular
iTrader: (1)
Join Date: Sep 2007
Location: Carrickfergus, NI
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
This is what i'm aiming for myself, just a standard remap on a PPP, been looking for a thread like this. Will give me something to aim for. What's your torque figure Peter? As that's what i'm more interested in.
12 January 2008, 07:07 PM
#19
Scooby Regular
Thread Starter
Join Date: May 2005
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
chaps
It all took about an hour...simon and charlie who was driving were in the car most of the time on the RR then took it out on the road for testing.
torque figure...
looking at the graph charlie gave me i think it is 330 lbft at 4200 rpm
bhp is exactly 340.6 at 6000rpm (if im looking at the dotted graph)//
not sure
Simon might know
or there is another graph
It all took about an hour...simon and charlie who was driving were in the car most of the time on the RR then took it out on the road for testing.
torque figure...
looking at the graph charlie gave me i think it is 330 lbft at 4200 rpm
bhp is exactly 340.6 at 6000rpm (if im looking at the dotted graph)//
not sure
Simon might know
or there is another graph
12 January 2008, 07:51 PM
#20
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
thats the same numbers I remember.. 
Its not often I see a standard PPP car, normal they have already had exhaust changed and panel filter at least.
Simon
Its not often I see a standard PPP car, normal they have already had exhaust changed and panel filter at least.
Simon
12 January 2008, 08:20 PM
#23
Former Sponsor
Join Date: Jul 2005
Location: Wellingborough, Northamptonshire
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
Simon travels, and the results speak for themselves I think. In the next few weeks FlashCAN will be available for use by Ecutek dealers, so you'll be able to have your new 08 Imprezas remapped too!
You might find a few more HP from a new centre section, the aftre market items are about 3mm larger bore than the OE part.
You might find a few more HP from a new centre section, the aftre market items are about 3mm larger bore than the OE part.
12 January 2008, 08:27 PM
#25
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Rolling road is not essential but is very nice to see before and after figures etc..
Simon
12 January 2008, 08:32 PM
#26
Scooby Regular
iTrader: (12)
Join Date: Jun 2007
Location: Moved to the Darkside
Posts: 5,034
Likes: 0
Received 0 Likes
on
0 Posts
12 January 2008, 08:32 PM
#27
412/425 of forged love
iTrader: (12)
Join Date: Jan 2008
Location: www.surreyscoobies.com
Posts: 4,238
Likes: 0
Received 0 Likes
on
0 Posts
nice job there simon. he will be taking my 300bhp virginity on the 23rd jan. second time using him. great bloke.
great results on 2lt ppp
great results on 2lt ppp
12 January 2008, 08:46 PM
#28