hi all,jsut wondering what to do next.ive got around £200 at the min but i dont know what to go for, ive got the main things,zorst,fuel pump,shocks and springs,re map ect but i dnt know whats the next best ting to buy.

its running at 270bhp,which is ok but you know what its like...we're always after more.

any sugestions

 

Couple of barrels of 125 ron racing fuel? Or 3 tanks of normal fuel.

How's the handling? Drop links or anti roll bars or new bushes and stuff?

Im kinda new to scooby's so just throwing them out there

Tom

 

Dump Valve delete and a map tweek

 

can you delete the dump valve when its on the intercooler?

what will it do for me with a map tweak

 

decat the exhaust system mate.
You really need to decat your turbo up pipe (£120) and you will can get a remap to send your current bhp to about 300

Im running 286bhp but i couldnt get the car mapped any higher because i have a turbo up pipe which is catted and the reason for this is because under too high a temp your cat in the turbo up pipe may break causing your turbo to take in loads of fractions of cat...hence bye bye turbo

 

Exactly what happened to mine!

VF28 BANG!!

Fitted an STI DEcated up pipe.


Brilliant!


Regards



Alan MaC

 

Set of up rated pads / discs , you need to be able to stop first .

Mark

 

was thinking about going down the adj arb route to be honnest.

will a decat up pipe and map tweak see me 300bhp?

 

I would have thought mid 280`s to be realistic.

Id look more towards the stopping/handling route.

some decent pads, braided hoses to firm up pedal feel and a bleed/new decent fluid.

or as mentioned a rear ARB.

 

get some whiteline front/rear droplinks here as theyre on offer (i have these myself), and get a whiteline rear arb here

theres your £200 gone and the car will feel nice and stiff.

no need to thank me, i dont charge for this

 

22mm adjustable rear arb is the BEST VALUE MOD I made to my car !

HTH

DunxC

 

As above... Decat...

https://www.scoobynet.com/group-buys...group-buy.html

 

i agrwith getting a 22mm adj rear arb but think you should get your steering geometry done if it has not been