what size are classic scooby front door speakers?
15 July 2008, 07:41 PM
#3
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
in my old wrx i put 6.5" speakers in the front, and in my old uk classic, i put 5 1/4" speakers in the front. just depends what you want to fit. 5 1/4" can use the original plastic plates already on the car, just a couple of screw holes to be drilled. i did mine in under 90 mins both sides in pitch black
old...
new...
old...
new...
16 July 2008, 11:08 AM
#6
Use a flat balded screwdriver to prize out:
1. the cover over a screw at the front of the doorcard,
2. the window switches,
3. the door handle surround.
Undo the screw, and release the wiring from the window switches.
Undo the screw found UNDER the window switches. DO NOT undo the large screw inside the doorhandle.
Now use a large flat bladed instrument to gently lift and prize up around the lower, and front edge of the doorcard. If you slide a screwdriver along, you can FEEL each clip, once you find it, pull outwards gently.
Once you have all clips and screws undone, lift the doorcard vertically, and pull it towards you.
It really takes longer to describe than to do
Alcazar
1. the cover over a screw at the front of the doorcard,
2. the window switches,
3. the door handle surround.
Undo the screw, and release the wiring from the window switches.
Undo the screw found UNDER the window switches. DO NOT undo the large screw inside the doorhandle.
Now use a large flat bladed instrument to gently lift and prize up around the lower, and front edge of the doorcard. If you slide a screwdriver along, you can FEEL each clip, once you find it, pull outwards gently.
Once you have all clips and screws undone, lift the doorcard vertically, and pull it towards you.
It really takes longer to describe than to do
Alcazar
16 July 2008, 02:15 PM
#7
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
Use a flat balded screwdriver to prize out:
1. the cover over a screw at the front of the doorcard,
2. the window switches,
3. the door handle surround.
Undo the screw, and release the wiring from the window switches.
Undo the screw found UNDER the window switches. DO NOT undo the large screw inside the doorhandle.
Now use a large flat bladed instrument to gently lift and prize up around the lower, and front edge of the doorcard. If you slide a screwdriver along, you can FEEL each clip, once you find it, pull outwards gently.
Once you have all clips and screws undone, lift the doorcard vertically, and pull it towards you.
It really takes longer to describe than to do
Alcazar
1. the cover over a screw at the front of the doorcard,
2. the window switches,
3. the door handle surround.
Undo the screw, and release the wiring from the window switches.
Undo the screw found UNDER the window switches. DO NOT undo the large screw inside the doorhandle.
Now use a large flat bladed instrument to gently lift and prize up around the lower, and front edge of the doorcard. If you slide a screwdriver along, you can FEEL each clip, once you find it, pull outwards gently.
Once you have all clips and screws undone, lift the doorcard vertically, and pull it towards you.
It really takes longer to describe than to do
Alcazar
yeah its a piece of **** to do mate. just locating the screws, and being able to glide the card back in afterwards. if you fitted my exhaust ok all them months ago, trust me this will be like stealing a colostomy bag from pslewis.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM
