Triple gauge pod finished like dash?
#1
Triple gauge pod finished like dash?
As above, anyone know if they can be got and by who?Or even a carbon fibre one that fits like the original one(clips in not, double sided tape).Thanks.
#4
I was watching too LOL
....
I ended up doing this because I couldn't find one that matched ... so I went totally the other way !!! (and I'm not into carbon)
(I'll be adding this to my right up I did before once it's fully fitted. It's not clamped down this was just a test fitting!
....
I ended up doing this because I couldn't find one that matched ... so I went totally the other way !!! (and I'm not into carbon)
(I'll be adding this to my right up I did before once it's fully fitted. It's not clamped down this was just a test fitting!
#6
U-pol do a range of different coatings to match your dash. Choose the texture,then paint in the right colour.
Here's an example:
The cowling (from a classic with the sidelight switch on top) was cut to fit the shiftlight, then filled, then sprayed with a fine texture, then painted to suit.
This is the colour coat that was used for the cowling, but you can check colour against your dash. Just be aware that a cleaned up dash i.e. siliconed! is a different colour from a dash that hasn't been cleaned.
Here's an example:
The cowling (from a classic with the sidelight switch on top) was cut to fit the shiftlight, then filled, then sprayed with a fine texture, then painted to suit.
This is the colour coat that was used for the cowling, but you can check colour against your dash. Just be aware that a cleaned up dash i.e. siliconed! is a different colour from a dash that hasn't been cleaned.
Last edited by AlanG; 18 July 2008 at 09:23 AM. Reason: Pic was a bit big!
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM