Forester clutch
#2
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
about 4 hours labour on a ramp.
Stick with a standard clutch if you are keeping it standard.
Exedy clutches available here: https://www.scoobynet.com/group-buys...5-6-speed.html
Stick with a standard clutch if you are keeping it standard.
Exedy clutches available here: https://www.scoobynet.com/group-buys...5-6-speed.html
#3
Burbling. It is a same day job and we do these in Darlington for £150 labour but Scarborough is probably too far to travel but that gives you an idea.
Without the model year I cannot be 100% but if it is a 5 speed then £155 for an Exedy replacement clutch kit.
Without the model year I cannot be 100% but if it is a 5 speed then £155 for an Exedy replacement clutch kit.
#4
Thanks. Harvey its a 97 2.0 turbo s tb 5 speed manuel. How much for the clutch and for fitting. Could get the car to you drove it from birmingham today just cant boot it.
#6
Yes. Classic Impreza. £155 for the clutch and £150 for fitting.
The costs are fixed unless you want additional work.
We have flywheels in stock if required but will only replace the flywheel if necessary.
If you want it doing we want your exact car, model, year and VIN data, model and transmission codes.
Job can be done same day if you want to visit the "Historic Railway Museum" or explore the town.
The costs are fixed unless you want additional work.
We have flywheels in stock if required but will only replace the flywheel if necessary.
If you want it doing we want your exact car, model, year and VIN data, model and transmission codes.
Job can be done same day if you want to visit the "Historic Railway Museum" or explore the town.
#7
Thread
Thread Starter
Forum
Replies
Last Post