How do I fit my Scoobynet window sticker !
#3
etc
Can't find a smiley to say 'oh my what a complete thicko' but you get the idea.
Bugger, it's raining can't do the outside.
Cheers Ian mate
(Ps please don't anyone reply to this thread anymore, I wish this to drop of the bottom post haste to save me any more embarrasment )
Can't find a smiley to say 'oh my what a complete thicko' but you get the idea.
Bugger, it's raining can't do the outside.
Cheers Ian mate
(Ps please don't anyone reply to this thread anymore, I wish this to drop of the bottom post haste to save me any more embarrasment )
#7
Here goes for the benefit of everyone who doesn't know.......
The stickers are really very easy to apply when you know how.
Firstly, don't do the job on a really cold day, it makes the job twice as hard.
Secondly, get a squirty gun thing, fill it with water and then add a squirt of fairy liquid.
Throughly spray the area where you want to put the sticker with the water solution. Apply the sticker over the top of the water. If you get it in the wrong position, you can gently pull it off and re-position it. If you do pull the sticker off, re-spray the area with a little more solution.
When the sticker is in the right position, use a squeegee to get all of the water out from under the sticker.
Then.., leave the sticker an hour or two for the water underneath to evaporate and for the sticker to dry out.
Finally, once the sticker has dried out, remove the thin paper backing from the letters and "hey presto"
Hope this helps.
Kurt
The stickers are really very easy to apply when you know how.
Firstly, don't do the job on a really cold day, it makes the job twice as hard.
Secondly, get a squirty gun thing, fill it with water and then add a squirt of fairy liquid.
Throughly spray the area where you want to put the sticker with the water solution. Apply the sticker over the top of the water. If you get it in the wrong position, you can gently pull it off and re-position it. If you do pull the sticker off, re-spray the area with a little more solution.
When the sticker is in the right position, use a squeegee to get all of the water out from under the sticker.
Then.., leave the sticker an hour or two for the water underneath to evaporate and for the sticker to dry out.
Finally, once the sticker has dried out, remove the thin paper backing from the letters and "hey presto"
Hope this helps.
Kurt
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 08:18 PM