What figures after remap on STI Blobeye.
#1
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Pitsea
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
What figures after remap on STI Blobeye.
Hi peeps..
I think I have finally found the STI for me just about to leave holding deposit...will stick some pictures up when I get it..
It's a UK 2003 STI - standard apart from up rated Panel Filter and BOV + a Afterburner back box still has CAT(s) in place.
After an ECUTek remap what sort of figures do you think I will see ?
Just roughly more or less then a STI with PPP ?
Ian.
I think I have finally found the STI for me just about to leave holding deposit...will stick some pictures up when I get it..
It's a UK 2003 STI - standard apart from up rated Panel Filter and BOV + a Afterburner back box still has CAT(s) in place.
After an ECUTek remap what sort of figures do you think I will see ?
Just roughly more or less then a STI with PPP ?
Ian.
#4
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
#5
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Tony
#6
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Pitsea
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys
Thats basically what I had already been told...
Looking forward to getting car - Picking it up on the 14th of Feb due to other commitments
Thats basically what I had already been told...
Looking forward to getting car - Picking it up on the 14th of Feb due to other commitments
Trending Topics
#12
Scooby Regular
iTrader: (17)
Would be a lot more acurate if people quoted wheel BHP Figures not the fly, there's a whole lot of difference in the quoted conversions rates between mappers, some say 16% some say 24%.
It's not all about figures anyway it's about how different the car picks up and pulls all the way through the rev range, not boasting that my cars got this or that BHP!!!!
It's not all about figures anyway it's about how different the car picks up and pulls all the way through the rev range, not boasting that my cars got this or that BHP!!!!
#13
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: Pitsea
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Guys..
Probably going to enjoy the car the way is for a while...
But then looking a re-map with JGM or Xtreme Scoobies.
Roll on 14th of Feb, If I wait that long I might take a day off and pick it up before hand.
Probably going to enjoy the car the way is for a while...
But then looking a re-map with JGM or Xtreme Scoobies.
Roll on 14th of Feb, If I wait that long I might take a day off and pick it up before hand.
#14
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
An 03 blob doesnt need the uprated fuel pump or the sports cat for that, 330 is about as high as it will go because of the exhaust restrictions, note that JDM cars dont need an uprated fuel pump to run 360bhp but they do need an exhaust system (02 bugs on the other hand did need an uprated fuel pump for the PPP)
Tony
Tony
The TSL333, PS package and everyone else all uprate the fuel pump, and the mappers recommend it too.
I'll stick to what i said before. Doubt he'll get 330 with a panel filter and cat-back exhaust.
Mine made 315bhp on Dastek rollers with a walbro pump, full afterburner decat, ported/wrapped headers, panel filter.
#16
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Weird that as part of the PPP a fuel pump is included and that's to take it to roughly 300bhp. It's a UK Sti he's on about, so JDM doesn't matter.
The TSL333, PS package and everyone else all uprate the fuel pump, and the mappers recommend it too.
I'll stick to what i said before. Doubt he'll get 330 with a panel filter and cat-back exhaust.
Mine made 315bhp on Dastek rollers with a walbro pump, full afterburner decat, ported/wrapped headers, panel filter.
The TSL333, PS package and everyone else all uprate the fuel pump, and the mappers recommend it too.
I'll stick to what i said before. Doubt he'll get 330 with a panel filter and cat-back exhaust.
Mine made 315bhp on Dastek rollers with a walbro pump, full afterburner decat, ported/wrapped headers, panel filter.
The fuel pump is not needed until you start hitting the 380bhp mark, then its advisable to upgrade, but the standard item on the blobs is more than capable of 360bhp.
The trouble is that the exhaust is restrictive, 330bhp is about as much as you will get out of a blob without the exhaust being changed.
Tony
#17
Scooby Regular
doesn't 24% come from dyno dynamics?
bhp figures on a dyno are known to vary, road dynos are unreliable at best, hub dynos don't take into acount mass of wheels etc etc.
you pays your money you takes your choice.
bhp figures on a dyno are known to vary, road dynos are unreliable at best, hub dynos don't take into acount mass of wheels etc etc.
you pays your money you takes your choice.
#18
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
The fuel pump was only ever apart of the MY02 PPP spec, not the blob eyes as they had an uprated part from the factory
The fuel pump is not needed until you start hitting the 380bhp mark, then its advisable to upgrade, but the standard item on the blobs is more than capable of 360bhp.
The fuel pump is not needed until you start hitting the 380bhp mark, then its advisable to upgrade, but the standard item on the blobs is more than capable of 360bhp.
#19
Scooby Regular
iTrader: (12)
Join Date: Jun 2007
Location: Moved to the Darkside
Posts: 5,034
Likes: 0
Received 0 Likes
on
0 Posts
The fuel pump was only ever apart of the MY02 PPP spec, not the blob eyes as they had an uprated part from the factory
The fuel pump is not needed until you start hitting the 380bhp mark, then its advisable to upgrade, but the standard item on the blobs is more than capable of 360bhp.
The trouble is that the exhaust is restrictive, 330bhp is about as much as you will get out of a blob without the exhaust being changed.
Tony
The fuel pump is not needed until you start hitting the 380bhp mark, then its advisable to upgrade, but the standard item on the blobs is more than capable of 360bhp.
The trouble is that the exhaust is restrictive, 330bhp is about as much as you will get out of a blob without the exhaust being changed.
Tony
Aaron
#21
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Tony
#24
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
I thought i was right. Here Tony, have one of these
#25
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
I'd do the pump as well Sammy. It's about £75 plus about £50 fitting. You'll need it if you want to get rid of those cats and take it further.
#26
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Go have a read of ALL the STI pdf's, then come back and tell me they are not cut and pasted! the MY02 car is THE only sti that required an uprated fuel pump because it wasnt strong enough when they added the PPP (think they even recalled the PPP cars because of it).
And i must add, its the first time i have heard of the MY06-07 cars needing an uprated fuel pump for 23ps
Tony
And i must add, its the first time i have heard of the MY06-07 cars needing an uprated fuel pump for 23ps
Tony
#28
Scooby Regular
Join Date: Aug 2005
Location: 392/361 MY04 STi
Posts: 7,638
Likes: 0
Received 0 Likes
on
0 Posts
Just read the 02 & 03/04 STi PDFs and for the 02 it doesn't mention adding a FP and for the 03/04 it does. Are you sure you've not got it the wrong way around?