Shailan

iTrader: (1)

I have just fitted a boost gauge and wanted a general concensus on the best place to take wires (positive, Negative and illumination) for the lighting of the gauge?

The boost gauge is mounted right side of driver.

thanks

shawn r

iTrader: (3)

i used the wires from the clock in centre of dash, might help if you say year you have.

Shailan

iTrader: (1)

2005 WRX

cheers

scoobymyster

Ive just baught a boost gauge too. I'm gonna mount mine in the same place.
Best place to get power from is fog light switch.
Mines a bugeye.

Shailan

iTrader: (1)

that's what I was thinking. Will try tomorrow.

Thanks

scoobymyster

Where abouts are connecting vacume pipe to, which boost pipe.
I'm pretty useless under the bonnet, I've been told to connect it to any pipe at the inlet, to be honest I don't know my inlet from my outlet.

Shailan

iTrader: (1)

I put a T piece on pipe to DV (same for recirc standard valve) I used black fuel pipe for the first section and then used the clear pipe supplied. Don't use the clear pipe from the inlet as this is not very heat resistant. I find fuel pipe to be the best.

I will post some pics tomorrow.

scoobymyster

Thanks

tonyrally

illumination on the stereo is the esiest to use

haroldhettaturbo

iTrader: (2)

Wired mine to the back of the fog light