version 4 type r remap
#5
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
my car runs 1.3 bar iv checked with 2 dif blitz boost guages is it possable its had a chip of sum sorts in japan as its still using the standard boost solonoid regards tony
#7
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
yes quite possible.
if you pull back the carpet on passenger side below dash you will find the ecu kick plate.. remove and you will see the ecu.. usually they out a nice sticker on the ecu.. the only slight issue is usually the timing is fairly agreesive and it won't like uk fuel.
Simon
if you pull back the carpet on passenger side below dash you will find the ecu kick plate.. remove and you will see the ecu.. usually they out a nice sticker on the ecu.. the only slight issue is usually the timing is fairly agreesive and it won't like uk fuel.
Simon
Trending Topics
#11
![Default](https://www.scoobynet.com/images/icons/icon1.gif)
i have a v4 wrx and i usually hit 1.3 bar as well with no boost cut . my friend sti4 can go about 1.3 bar as well. we always thought that the V4 and above had a higher boost cut.
i did hit some form of a cut one time (boost/fuel) at 1.7+ bar. due to an issue in my car my boost peaked very high.
i did hit some form of a cut one time (boost/fuel) at 1.7+ bar. due to an issue in my car my boost peaked very high.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM