Notices
ScoobyNet General General Subaru Discussion

Help needed on making it FASTER !!! Also re-map suggestions ??

Thread Tools
 
Search this Thread
 
Old 27 August 2009 | 09:29 PM
  #1  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default Help needed on making it FASTER !!! Also re-map suggestions ??

right, after a lot of thinking and consulting my bank account, i have decided i want to pump a few more gee gees into my engine.

im not rich so im just going for the simple / cheap-ish mods before i get it re-mapped. up to now i have walbro, k&n panel filter, full de-cat ( all 3 cats ). all in all including the re-map should cost me about £650, and a few favours !

but is there anything else i could do before i get it mapped, something that will work with these mods or something that will give a bit more bhp ?? cant afford turbos or FMIC's ect though ?

and fially, where am i best getting it mapped ? what are your suggestions / comments / experience ?? i live about 20 mins from Hull so dont want to be travelling real far, i dont mind a couple of hours though ?

sorry for the essay, cheers nick
Old 27 August 2009 | 09:34 PM
  #2  
hughes741's Avatar
hughes741
Scooby Regular
 
Joined: Jul 2009
Posts: 433
Likes: 0
From: warrington
Default

Originally Posted by n_12ead

im not rich so im just going for the simple / cheap-ish mods before i get it re-mapped. up to now i have walbro, k&n panel filter, full de-cat ( all 3 cats ). all in all including the re-map should cost me about £650, and a few favours !

am i reading it wrong £650 for the mods plus remap? a remap alone is around £630
Old 27 August 2009 | 09:42 PM
  #3  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

walbro cost me £70, panel filter cost me £32 and a good friend of mine is making me a full de-cat exhaust in exchange for me decorating his living room ( what i do for a living ) !! and as for the remap, most of the ones i have seen advertised on tuning companies websites are like only £550 ??
Old 27 August 2009 | 09:47 PM
  #4  
hughes741's Avatar
hughes741
Scooby Regular
 
Joined: Jul 2009
Posts: 433
Likes: 0
From: warrington
Default

thats what i thought but when you speak to them its 550 plus vat
Old 27 August 2009 | 09:50 PM
  #5  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

you know what, i have completely forgot about the f**kin VAT, i appologise

nick
Old 27 August 2009 | 09:52 PM
  #6  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

suppose i could always claim it back, do you think i could blag the fact i need a re-map for a painting and decorating business ?? lol
Old 27 August 2009 | 09:53 PM
  #7  
hughes741's Avatar
hughes741
Scooby Regular
 
Joined: Jul 2009
Posts: 433
Likes: 0
From: warrington
Default

as for where to get a remap apparantley jolly green monster is one of the best and he will travel to you
Old 27 August 2009 | 11:15 PM
  #8  
Proby521's Avatar
Proby521
Scooby Regular
iTrader: (1)
 
Joined: Mar 2003
Posts: 802
Likes: 0
From: Wolverhampton
Default

Originally Posted by n_12ead
suppose i could always claim it back, do you think i could blag the fact i need a re-map for a painting and decorating business ?? lol
a remap is essential to get to the job on time Got to keep the customers happy!

What model scoob you got?
Old 27 August 2009 | 11:21 PM
  #9  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

"excuse me whats this remap thing for ??", "ah well dont want to be late do i lol "

its a 2004 wrx mate, done a few bits to it since i got it back in feb, yourself ?
Old 27 August 2009 | 11:32 PM
  #10  
dunx's Avatar
dunx
Scooby Senior
iTrader: (3)
 
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
Default

Contact Andrew Carr, he does OS mapping at half the price... lots of extras added in to like launch control, or "safe" warm-up from cold....

He did Rick's Ev* in Hull last weekend, so he gets around, or you can pay his fuel costs to come top you. He's based in the NW.

HTH

dunx

P.S. Shoud make around 280/300 if you are lucky....

Last edited by dunx; 27 August 2009 at 11:34 PM.
Old 28 August 2009 | 09:49 AM
  #11  
ross_wrx's Avatar
ross_wrx
Scooby Regular
 
Joined: Sep 2008
Posts: 353
Likes: 0
From: Lincolnshire
Default

Sorry to jump in, does Andrew Carr have a website or any contact details?
Old 28 August 2009 | 01:03 PM
  #12  
dunx's Avatar
dunx
Scooby Senior
iTrader: (3)
 
Joined: Jun 2006
Posts: 14,333
Likes: 0
From: Slowly rebuilding the kit of bits into a car...
Default

I can ask "coops" for a phone number.....


OpenEcu (MY01-09 Impreza/Legacy/Forester, Evo V-IX)
Ecutek (MY99/00 and later cars which have already have an Ecutek license by arrangement)
Simtek (MY92-05) Authorised dealer
ESL (MY92-96) Authorised dealer
PowerFC (MY92-00, plus Evo4-6)
GEMS
Link (Possum Link, G2, G3, G4)
Autronic
Motec

Last edited by dunx; 28 August 2009 at 01:05 PM.
Old 28 August 2009 | 02:34 PM
  #13  
Mr. WRX's Avatar
Mr. WRX
Scooby Regular
 
Joined: May 2009
Posts: 107
Likes: 0
Default

n_12ead if you go down the OS route let me know how you get on ... i need a remap and am on a budget also (03' WRX)

Edit : just done a quick search .. sounds good !

https://www.scoobynet.com/scoobynet-...ping-good.html

Last edited by Mr. WRX; 28 August 2009 at 02:42 PM.
Old 28 August 2009 | 07:22 PM
  #14  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

Originally Posted by Mr. WRX
n_12ead if you go down the OS route let me know how you get on ... i need a remap and am on a budget also (03' WRX)

Edit : just done a quick search .. sounds good !

https://www.scoobynet.com/scoobynet-...ping-good.html
eye ok will do, where you from aswell, might be able to get it done cheaper if thers a couple of us !!
Old 28 August 2009 | 07:27 PM
  #15  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

can anyone please tell me the difference between a normal remap and an OS remap ? cheers
Old 28 August 2009 | 07:30 PM
  #16  
daz1968's Avatar
daz1968
Scooby Regular
iTrader: (13)
 
Joined: Jun 2007
Posts: 2,481
Likes: 0
Default

ecutek is a licensed product so the mapper has invested a fair amount of cash into his business, open source is a free forum based tuning product that anyone with basic pc skills can use. If the same mapper used ecutek and open source the results should be the same, so I would say that if you find a good mapper on open source there are good savings to be had, but ecutek being a recognised product may give more faith to a potential buyer if you want to sell your car.
Old 28 August 2009 | 07:36 PM
  #17  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

ah right im with you now, so say if a car was advertised as having an ecutek remap, then you know it has been done by a proper company / garage ect, whereas OS maps can be done by anyone for a bit of cash ?

well from what people are telling me i might have to go OS and andrew carr sounds like the person

cheers
Old 29 August 2009 | 01:12 AM
  #18  
Mr. WRX's Avatar
Mr. WRX
Scooby Regular
 
Joined: May 2009
Posts: 107
Likes: 0
Default

Originally Posted by n_12ead
eye ok will do, where you from aswell, might be able to get it done cheaper if thers a couple of us !!

Im in Shropshire m8, where are you on east coast?
Old 29 August 2009 | 12:04 PM
  #19  
daz1968's Avatar
daz1968
Scooby Regular
iTrader: (13)
 
Joined: Jun 2007
Posts: 2,481
Likes: 0
Default

mocom racing and thwaites developments also seem to be praised on here and both offer open source maps, so go with whoever is closest.
Old 29 August 2009 | 07:14 PM
  #20  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

Withernsea mate, about 20 mins from Hull
Old 30 August 2009 | 09:40 AM
  #21  
bigarf's Avatar
bigarf
Scooby Regular
iTrader: (67)
 
Joined: Oct 2007
Posts: 4,061
Likes: 0
From: w,yorkshire
Default

Originally Posted by n_12ead
Withernsea mate, about 20 mins from Hull
get your parts on and give andrew a call,you wont be dissapointed.he has mapped mine many times now. i either travel up to him or he comes down to me.it would probably take you around an hour and half to two hours to get to him as he is in preston.
Old 30 August 2009 | 09:48 AM
  #22  
Smurf2k's Avatar
Smurf2k
Scooby Regular
iTrader: (6)
 
Joined: Jul 2005
Posts: 294
Likes: 0
From: by the broken lamp post
Default

Pat The Map (Pat Hebourn) has mapped a lot of the cars in HUll. When mine is ready for a remap I will be going to him as he mapped it for the previous owner.
Car is running Circa 380bhp (Pat guesstimate) and it is a very safe map. No Knock no det. I never see my Knock link light up even when I give it some welly which is rare.

I can get his number for you if you wish?
Old 31 August 2009 | 01:45 PM
  #23  
Mr. WRX's Avatar
Mr. WRX
Scooby Regular
 
Joined: May 2009
Posts: 107
Likes: 0
Default

Can anyone suggest a os mapper in the shropshire / West Mids area please?
Old 31 August 2009 | 01:53 PM
  #24  
ulusaba1's Avatar
ulusaba1
Scooby Regular
 
Joined: Oct 2006
Posts: 75
Likes: 0
Default

Hi n12 ead

Have you contacted Andrew Carr yet?

I have a 2005 WRX which I would like mapping, from reading earlier posts he has a good reputation.

I'm only in south Yorkshire so we may get a discount if we arrange together or sort out a group buy.

Cheers Paul
Old 31 August 2009 | 06:33 PM
  #25  
n_12ead's Avatar
n_12ead
Thread Starter
Scooby Regular
 
Joined: Feb 2009
Posts: 232
Likes: 0
From: East Yorks Coast
Default

Originally Posted by ulusaba1
Hi n12 ead

Have you contacted Andrew Carr yet?

I have a 2005 WRX which I would like mapping, from reading earlier posts he has a good reputation.

I'm only in south Yorkshire so we may get a discount if we arrange together or sort out a group buy.

Cheers Paul
hi, no not as yet i havent, he has PM'd me though so he knows im interested, my car wont be ready for a remap for at least a month or so though, but when it is then i will defo be getting it done ?

cheers
Old 31 August 2009 | 06:42 PM
  #26  
AlanPPP's Avatar
AlanPPP
Scooby Regular
iTrader: (2)
 
Joined: Jan 2005
Posts: 2,010
Likes: 0
From: Wirral,Pensby
Default

This guy sounds good...and local how can i get in touch with him?? He on here??
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
domu
ScoobyNet General
7
03 October 2015 04:46 AM
taylor85
Wanted
2
13 September 2015 05:57 PM
AzzDSM
Engine Management and ECU Remapping
4
13 September 2015 04:59 PM
robbie1988
Wanted
2
13 September 2015 10:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 07:51 PM



Quick Reply: Help needed on making it FASTER !!! Also re-map suggestions ??



All times are GMT +1. The time now is 07:02 PM.