Can anyone tell me where the nearest specialist is in cumbria please.
Not a main dealer can find them....
Cheers

 

I'd join Cumbrianscoobs and post on their forum. Rob on there would be a good person to ask.

There are a few local garages out west but quite a few people travel a bit to AS Performance in Birtley (I think) or to Scoobytechnix down in Fleetwood.

Shaun

 

Cheers Shaun,

Yeah thats me I do prepare quite a few scoobs for mapping & other modifications, all depends on what you want out of your car. Pm me if you like I will only be to happy to assist.

Cheers
Rob

 

Hi Rob

Sorry to hijack someone else's thread but I'm having a real pain of a job trying to get a replacement APS DR500 hose FMIC hose and get it fitted......any help would be most appreciated

Shaun

Just off to my lads PC to find a pic LOL

 

Back on the Main PC (the boy has logged off Runescape and gone to bed)

It's this hose down by the battery.......held together by a strip of welly booy and silicone




Shaun

 

have you tried contacting aps for a piece of silicone hose ?? if you have whats the diameter of the pipe i may have some intercooler hose at work but i think the diameter could be a bit smaller that that, its difficult to say from the picture.

cheers
Rob

 

You could try TEG Sport at Carneforth or DSAutomotives who are the main APS stockist, they are in Aylesbury Oxfordshire. The link is www.dsautomotives.co.uk

 

Have just noticed you are running a MAF with a induction kit. I have tried this and the readings are all over the place. How did you get yours sorted?

 

Rob.......... I tried to get a replacement from APS but they say the APS DR500 is obsolete and they don't do any spares

I phoned Olly at RCMS and he agreed that this is the case, he can provide a copy if he can have the original which is a bit tricky as LOL

I'll try TEG and DS automotives


The MAF was re-scaled by Bob Rawle as the intake diameter was larger than the OEM.....if you have an induction kit with the OEM size then the ECU should cope

Shaun

 

Thats a bit of a bugger
What diameter is the pipe, I may have some hose at work that will fit a treat

 

Rob

Just having a look at the APS website.....it's got a lot of curves on it LOL

Shaun