Notices
ScoobyNet General General Subaru Discussion

help guys struggling to start

Thread Tools
 
Search this Thread
 
Old 03 March 2010 | 11:56 PM
  #1  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default help guys struggling to start

hi guys i have a my93 wrx she was running on three cylinders i changed coils and when i changed spark plugs 3 of them the tips had broken of and they were very black so i changed them and al was fine the the other day i went out there stated it up and had clouds of white smoke wen reved at all now she is struggling to start and somtimes wont start fires but wont start help please as im having a break down please guys
Old 04 March 2010 | 01:48 AM
  #2  
deanb1980's Avatar
deanb1980
Scooby Regular
 
Joined: Dec 2009
Posts: 1,132
Likes: 0
From: worcestershire
Default

sounds like head gasket if you have white smoke thats water burning
Old 04 March 2010 | 03:01 AM
  #3  
Eternal Rage's Avatar
Eternal Rage
Scooby Regular
iTrader: (7)
 
Joined: Jan 2008
Posts: 542
Likes: 0
From: Manchester
Default

Yup, either one of the tips from the spark plugs has got jammed in the turbo blades and caused the oil seals to go... or... more likely a head gasket gone. Mine went, white smoke and struggled to start and rev properly. Get it sorted before it dies of oil starvation like mine did. oops.
Old 04 March 2010 | 06:56 PM
  #4  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default

guys this is what i thought at first but someone sed it could be turbo also i have not been losing coolant no oil in water and not overheating so no head gasket symptoms
Old 04 March 2010 | 08:01 PM
  #5  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default

bump
Old 05 March 2010 | 04:33 PM
  #6  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default

no longer smoking as bad guys just struggling to start and eratic idleing checked water still at top were it has been since getting the car so im not lossing any fluids help guys p[lease i dont no wot to do next
Old 05 March 2010 | 05:39 PM
  #7  
TonyBurns's Avatar
TonyBurns
Scooby Regular
iTrader: (3)
 
Joined: Aug 2000
Posts: 25,565
Likes: 2
From: 1600cc's of twin scroll fun :)
Default

You could have knocked and damaged your thermostat, still is this water vapour or is it white smoke? And you don't have to lose lots of water/oil or even get white gunk in your oil for the head gasket to have gone, the issue could be compression related so worth getting that checked (ie take to dealer)

Tony
Old 05 March 2010 | 05:52 PM
  #8  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default

i marked the water level last week and it has not used any
Old 07 March 2010 | 07:22 PM
  #9  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default

hi guys rite just a quick update i had the car compression tested today and all was fine so i can assume this is not head gasket the car fires and somtimes starts but only when u tap the throttle and then it starts idles about 300-400rpm and thens splutters and dies help guys im realy strugling with this
Old 07 March 2010 | 09:41 PM
  #10  
mikeyb86's Avatar
mikeyb86
Thread Starter
Scooby Regular
 
Joined: Nov 2009
Posts: 193
Likes: 0
Default

bump
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Darrell@Scoobyworx
Trader Announcements
26
30 January 2024 02:27 PM
drsrst2zvh
ScoobyNet General
7
23 September 2015 08:37 PM
Bazil_SW
Engine Management and ECU Remapping
24
22 September 2015 12:55 AM
jason62
General Technical
13
21 September 2015 06:20 PM
techdw
ScoobyNet General
3
20 September 2015 10:31 PM




All times are GMT +1. The time now is 03:24 PM.