scoobyricht

iTrader: (4)

hi all

i have a "friend" on facebook bragging that his 94 classic with a vf22 is pulling over 600hp, i dont know about supporting mods etc but from pics its has no FMIC and only a small exit exhaust... is 600 even possible with a vf22?
says hes wasted the new focus rs, not that thats a benchmark but they are quite quick. i know is daft but want propper ammo before i tell him hes a nobend...

cheers

Rich

wrighty338

iTrader: (33)

lol

Scooby_CL

iTrader: (2)

'The VF22 has the largest potential for peak horsepower. In other words, in the IHI model range, the VF 22 supports the highest boost levels. It is capable of running up to 25 psi. Because it is a roller bearing turbo, turbo lag is minimal...the boost comes on around 3300 rpm. Expect to max out the VF22 somewhere in the 400-450 hp range'

I very much doubt he has anywhere near 600bhp unless running full forged internals or a stroker kit and some sort or Garrett variant turbo

Scooby_CL

iTrader: (2)

..

sandyRS16i

iTrader: (13)

Not gospel, but a decent guide for turbo outputs - but in a nutshell you wont be getting 600bhp from a TMIC or VF22

http://www.wrxtuners.com/forums/f95/...-asking-20013/

Think its safe to say your 'mate' talks a loads of ****e.

scoobyricht

iTrader: (4)

ill ask if he has done any engine work lol

tathan

maybe he's got an ebay resistor.

philhasasti

600bhp!!!

jonny_693

iTrader: (5)

The compressor wheel would of shattered long before that.

Mifo

iTrader: (10)

600 bhp ?

SPEN555

Might be two of em on a flat six 3 litre

ryan33hks

iTrader: (2)

See if he's got one of the suparcharged induction kits too

fastboyslim

iTrader: (2)

Good find fella, was a good read.

Jolly Green Monster

iTrader: (4)

vf22 is a 350bhp turbo on a subaru.. lol

as him if it looks and sounds like mine?

http://s950.photobucket.com/albums/a...t=M2U00052.flv



Simon

mje_wrx

iTrader: (6)

350 tops, iv one fitted with many supporting mods, they wont run 400, jgm informed me at surrey rollers

stedee

iTrader: (4)

lol - why do they do it, nobrot

KAS35RSTI

iTrader: (73)

Is the VF22 hybrid capable of 400? As ive heard rumours.

RA Dunk

A MY94, they have the old slanty type interboilers dont they? 600 my ar$e lol

Ask him what size of injectors he has fitted to make that power

rogos

so that he can resist talking from the wrong hole .

Jolly Green Monster

iTrader: (4)

problem is "vf22 hybrid" could mean a fair few combinations or turbo parts but some part of it came from a vf22... the exhaust housing is fairly large and does make reasonable power with other turbo parts buit then it is not as vf22 anymore

Simon

KAS35RSTI

iTrader: (73)

Hmm i see, thats true aswell.

Saint AAI

Would the standard MAF not be maxed out long before the sort of airflow needed for 600bhp as well?

scooby L

another sorry case of pub talk...

by next week it'll be up to 650

I was sat in a pub listening to some chav boasting his mate's jetski was a 90mph one.... in the end I turned round and told him he was talking total bollox and (at the time) the jetski speed record was 82mph..and what ski was it... turned out it was a 1200 yammy..good for 65 tops.... but he'd still not accept it....

bigsinky

pure keek

jd5217

http://www.turbonator.co.uk/

must have one of these fitted aswell.

KAS35RSTI

iTrader: (73)

Ye defo if its a standard one.

sy.

iTrader: (8)

the pe1820 is bassed on a vf22 and with supporting mod's has made around 400bhp and this i am led to believe is the most or as far as it goes for anything related to the vf22

StickyMicky

Only if you use American horses

Petbeemer

probably got an ebay whistle on the exhaust too!

dynamix

iTrader: (3)

pmsl at 600