Ni2ki2000

Hey guys and girls,
Found that my door has been kicked in on my car, funnily enough happened night that i split with my bloke!! siighh.. had the car less than a month was my bday present, you may have seen my other post about it!!
Best place to get it done? best company?
Need it done asap, completely gutted!
Thanks
Nikki

Leaney-g

Where are you based?

IainMilford

iTrader: (15)

in bristol there a company called dent magic, only good if you live near bristol though lol

my06 ppp silver

iTrader: (2)

while you are waiting, see if you can get another door as a lot of places cant work with the lightweight ally doors (they are like tin basically). i ended up needing a new door for my hawkeye which tbh was cheaper new than i expected. the real money is in the spraying/ labour, as they may have to spray the whole side of the car, just depends how fussy you are. hope it dont cost too much, if it happens again, get him filled in.

IainMilford

iTrader: (15)

^^ good point, especially with silver, its one of the hardest colours to get an exact match. I had a small dent about the size of a 5pence piece taken out of my front wing, they resprayed the wing and the door, cost £250 !

Leaney-g

I've had a panel done for £120. The car is silver and he did a perfect job.

The place is in Worthing, Sussex if that helps.

my94wrx

iTrader: (4)

alloy doors?? not a subaru mate, to the OP if the door is to bad they may only improve it and not fully rectify it as the metal will stretch and not go back to its original form.

my06 ppp silver

iTrader: (2)

sorry my abbreviation was meant to read aluminium rather than alloy, see your concern though, wrought iron doors may be a bit of an issue power/weight

my94wrx

iTrader: (4)

alloy/aluminium either or the other they are neither cheap thin steel they are.

Steve T

iTrader: (14)

I,ve always had good results using a paintless dent removal company. The one I would recommend is based in Warrington so no use to you. So I would try a PDR company in your area , otherwise I,d try to buy a used door in the same colour.

Anders_WR1

iTrader: (8)

Here's a few:

http://www.dentwizard.co.uk

http://www.dingmaster.co.uk

http://www.dentman.co.uk

Anders

my06 ppp silver

iTrader: (2)

do these work even with a crease? i always thought this was a key factor on a yes/no repairable pdr

greatgonzo

iTrader: (1)

I have used these dent removal men and they are excellent its amazing what they can pull out.

jh1

i was quoted £280 for a bonnet dent as they said it would need a respray, however autodent did it for £50 no need for any paint. a lot of main dealers use them too in my area.