Big thanks to Alan & Martyn Jeffery.
#1
Thread Starter
Scooby Regular
iTrader: (10)
Joined: Oct 2009
Posts: 265
Likes: 0
From: On the road for 500+
Big thanks to Alan & Martyn Jeffery.
Just wanted to say a big Thanks to Alan and Martyn at Enginetuner.I got my car remapped today as i have finally run in my forged 2.1 stroker build which was built at enginetuner.My car was great to drive home it pulled really well and was silky smooth,plus the anti lag sounds super cool.
I would recommend them to anyone,they really know there stuff and have a great set up in plymouth,it was well worth the 380 mile round trip.
Martyn's a top bloke and took the time to answer the 100 questions i asked him,whilst he did the mapping.
Thanks again!!
I would recommend them to anyone,they really know there stuff and have a great set up in plymouth,it was well worth the 380 mile round trip.
Martyn's a top bloke and took the time to answer the 100 questions i asked him,whilst he did the mapping.
Thanks again!!
#6
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Just wanted to say a big Thanks to Alan and Martyn at Enginetuner.I got my car remapped today as i have finally run in my forged 2.1 stroker build which was built at enginetuner.My car was great to drive home it pulled really well and was silky smooth,plus the anti lag sounds super cool.
I would recommend them to anyone,they really know there stuff and have a great set up in plymouth,it was well worth the 380 mile round trip.
Martyn's a top bloke and took the time to answer the 100 questions i asked him,whilst he did the mapping.
Thanks again!!
I would recommend them to anyone,they really know there stuff and have a great set up in plymouth,it was well worth the 380 mile round trip.
Martyn's a top bloke and took the time to answer the 100 questions i asked him,whilst he did the mapping.
Thanks again!!
Trending Topics
#11
Scooby Regular
iTrader: (5)
Joined: Aug 2003
Posts: 6,517
Likes: 1
From: Mitsubishi Lancer Evolution 8 RS
I popped down for an MOT and a map tweek just before Xmas only a 320mile round trip very welcoming and knowledgable to boot! I'm always picking Martyn's brain, I'm sure he curses me to the Mrs
#12
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
If anybody else wants the number, just ask me...
#13
#18
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
#20
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
The car looks just fine, the engine is all over the shop!
Everything's under way, no problems found with the internals, hoping to get the motor back together by this time next week.
I'm on holiday for a week, but of course the chaps will be hard at it.
( I'll be checking them on remote CCTV from the middle of the Med.)
Everything's under way, no problems found with the internals, hoping to get the motor back together by this time next week.
I'm on holiday for a week, but of course the chaps will be hard at it.
( I'll be checking them on remote CCTV from the middle of the Med.)
#23
Thread Starter
Scooby Regular
iTrader: (10)
Joined: Oct 2009
Posts: 265
Likes: 0
From: On the road for 500+
It made 273.0 hp and 275ft lb of torque.The spec is the forged 2.1 stroker build with cdb,simtek and magnex exhaust.
It dose really pull well and has good power low down in the revs.Cant wait to get my fmic,injectors,fuel pump,decat,headers fitted and then get it mapped again by martyn.
It dose really pull well and has good power low down in the revs.Cant wait to get my fmic,injectors,fuel pump,decat,headers fitted and then get it mapped again by martyn.
#25
It made 273.0 hp and 275ft lb of torque.The spec is the forged 2.1 stroker build with cdb,simtek and magnex exhaust.
It dose really pull well and has good power low down in the revs.Cant wait to get my fmic,injectors,fuel pump,decat,headers fitted and then get it mapped again by martyn.
It dose really pull well and has good power low down in the revs.Cant wait to get my fmic,injectors,fuel pump,decat,headers fitted and then get it mapped again by martyn.