Exhaust help needed!
#1
Exhaust help needed!
Hi all,
I currently have a nur spec exhaust fitted to my2002 wrx.
It is too loud for me and I want to change it!!
The system is 3" fully de-catted and I have been told I can just change the backbox!
Has anyone had the same issue? Which backbox did you change to?
I am looking for a much quieter one that produces a nice deep burble.
Your comments will be well received....
Cheers
I currently have a nur spec exhaust fitted to my2002 wrx.
It is too loud for me and I want to change it!!
The system is 3" fully de-catted and I have been told I can just change the backbox!
Has anyone had the same issue? Which backbox did you change to?
I am looking for a much quieter one that produces a nice deep burble.
Your comments will be well received....
Cheers
#2
Scooby Senior
iTrader: (51)
Joined: Nov 2005
Posts: 20,491
Likes: 2
From: Wherever I park my car, that's my home
Blitz Nur Spec flanges are a different orientation to OE exhausts and the bends are slightly different so other back boxes wont fit without some fettling such as a new flange etc. Best to get a full system. Consider Cobra or Revolution both of which are track friendly, so quieter, but keep that famous burble.
#5
Thanks guys,
Can you just buy a compatable centre section with a resonator? Would that reduce the sound considerably? I do not want to fit a bung as I have been told this is not a good option due to back pressure.
I would be willing to swap my system if anyone is interested! I am in the Cambridge area.
Cheers
Can you just buy a compatable centre section with a resonator? Would that reduce the sound considerably? I do not want to fit a bung as I have been told this is not a good option due to back pressure.
I would be willing to swap my system if anyone is interested! I am in the Cambridge area.
Cheers
#6
Thanks guys,
Can you just buy a compatable centre section with a resonator? Would that reduce the sound considerably? I do not want to fit a bung as I have been told this is not a good option due to back pressure.
I would be willing to swap my system if anyone is interested! I am in the Cambridge area.
Cheers
Can you just buy a compatable centre section with a resonator? Would that reduce the sound considerably? I do not want to fit a bung as I have been told this is not a good option due to back pressure.
I would be willing to swap my system if anyone is interested! I am in the Cambridge area.
Cheers
#7
You could try a new afterburner centre section with a Ninja 2 back box. Loud enough to put a smaile on your face, with a good burble from idle to 2.5k rpm, yet just about quiet enough to stop the neighbours from rioting outside the house.
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM