I have 3" full decat, Ecutek remap, print out from Scoobyworks 323 HP. I am after 360 to 380 and was wondering it this is possible without engine internals work? Gearbox work? And will I have to get a front mount? Is a nice turbo the way to go to get my desired power I'm after? And if so would a new turbo and a remap get me there? It's a daily driver so need it to be reliable to.
Thanks

 

you wont need to uprate the internals at that power, gearbox will be fine, will not really need a FMIC as TMIC good for around 400bhp, will however require a TD05 18g turbo or something similar to get to that power.

 

A previous thread posted by me with lots of good info: https://www.scoobynet.com/scoobynet-...-spend-it.html

 

Go for an SC36 from Scoobyclinic, good results.

 

tdo5 18g turbo should get between 360-380

or scoobyclinic sc38

you wont need any engine or gearbox work but an upgraded clutch when you change it next may be advisable

your sti top mount will be just fine at these levels

just a turbo and remap, standard injectors should be ok

hth

 

Well happy with that. Will it need a full remap at full price or not with just changing the turbo? As I can see they are not cheap. And as it has been done by Ecutek do I have to go back there or can I go to one that you guy recommend?