hi im going to fit my gauges at the weekend whats the normal running temps cars a blobeye running 351bhp 353ft/lb torque gauges are prosport
oil temp
oilp pressure
water temp
cheers

 

Water.....my fan cuts in at 97 degrees
Oil..........temps cruise at 80 odd, 95 driving properly, I'd get worried at 110
Pressure..7 bar at start up, runs hot at 6 bar and idles hot at a touch over 2 bar.

Bug WRX with TD05 18G and mods

Shaun

 

04 sti running circa 370bhp , depends on what oil you use etc for pressure, my average readings are:

Oil temp - 80-90 degrees normal, upto 100 on hard driving
oil pressure - 6-7 bar cold start, down to 2.2 bar on hot idle
not too sure about water temp

 

thanks guys

 

my classic with a 2.5 ran very similar as above, 400bhp

even driven failry hard, oil temp never above 95

my prosport boost gauge, failed after 2 weeks of fitting, probably due to loose wire/poor connection im assuming tho

 

Mine is almost identical, except that it ticks over hot at 3bar. It's a forged engine too, so pretty pleased with that.

It runs at 83 degrees water, 90 degrees oil and 6 bar hot oil pressure.

Did you not get a boost gauge? Or do you already have one?

 

Already have a boost gauge on the a pillar going to put these gauges in the dash pod

 

05 wrx at 280bhp ish

oil temp 80-90, can go just over 100 in traffic on a hot day or on track
oil pressure - cold idle up to 110psi warm idle 30psi, running pressure about 90psi