I've had my car now for 3 months. I've always used the same set of rollers/tuner for all the cars i've owned, 370bhp gtir, 420bhp gtir, 360bhp sapph, 350bhp nova let, 300bhp corsa b let, etc...

When I bought the car is was live mapped to 1.7bar, spec as below:-

Simtek Ecu with switchable maps (1bar and 1.7bar)
GT Spec 2 3 bolt headers (Harvey Smith heat wrapped)
Harvey Smith trick up pipe (Harvey Smith heat wrapped)
Harvey Smith TD05 20G turbo (Harvey Smith heat wrapped)
Cobra 3 inch downpipe (Harvey Smith heat wrapped)
Cobra 3 Inch non resonated cat back exhaust with 4.5 inch tail pipe
RCM huge K&N filter with stainless trumpet & MAF less Samco hose
Harvey Smith 550cc injectors
255lph Wallboro fuel pump
Custom breather setup with D1 catch can & braided breather hoses
HDI GT2 front mount intercooler
GGR Racing 230mm Sports clutch

Unfortunately the tuner i've always used hasn't got the software to map a simtek ecu. I took it there to have a power run where it made 298bhp @ 1bar and 358bhp @ 1.7bar and to have the knock and fueling checked. Whilst I was happy with the results, it's running rich and almost caused the tuners lamba to switch off.

I want to have it re-mapped to have anti-lag and launch control installed at the same time. Also my current tuner feels it could make an extra 15-20bhp due to the fact it's running rich.

Question is who to use around the Midlands area? Was thinking either TD or Zen? and advice or opinions welcome

 

If you give us a town then we can be more helpful. For me it would have to be a run to Scoobyclinic in chesterfield. Zen have a good reputation also, have a look through the threads to get some more options

 

I'm from Kettering, easy access to m1 - m6.

 

Scoobyclinic in Chesterfield might be a bit far,Do you know of any local clubs that could provide local info.

 

many mappers are mobile and travel
better rates on group sessions so try and get 2 or 3 lads together and take your pickor check local forum for group mapping
jolly green
Andy carr
just 2 of the great mappers for these cars with many more

 

Duncan at racedynamix he did mine not long ago he also sell's the simtek's so no's his way round them can be mapped on the road or you could do like i did and meet duncan at RCM and use there rollers..
The aftercare from him is also great he's straight to the point no bull

 

ZEN everytime for me chap. Mapped my car a few times now and his knowledge and ability is unbeatable.
Give Paul a bell, he can do it on the road or is often at RCM.

 

Bob Rawle

 

Whose dyno that?

Happy to come and map it on their dyno if that helps?

Simon

 

Mark at TDRacing in Warwick buddy, can map your simtek no probs. Give him a call 01926 403889. Also has rollers to check your figures

 

his dyno cell is v nice

 

simon (JGM) gets my vote, wouldnt get my car mapped anywhere else and know a few people who would say the same

 

Wont those injectors be holding it back a little?

Curious about how the 20g was wrapped, any pics?

bit off topic I know

 

+1

 

 

If the OP goes with you Simon perhaps you could borrow Marks dyno, that way everyone is happy

Quite a few good mappers around the Midlands to choose from TBH

 

 

Yes used marks dyno before hence I know what the cell is like

But if op has a dyno he uses a lot it sounds better to use that?

 

zen all the way and he uses rcm rollers

 

If you're in Kettering Zen is your nearest.

 

Another vote for Bob Rawle here

 

Simon, you Should be coming back soon when Mark fits my FMIC.

 

mark at td get my vote to. sorted place with good facilites top guys to worth a call if nothing else

 

 

I've always used streetracers in Leicester:-

http://shop.streetracersgd.co.uk/

I'm sure Gordon would let me use his rollers, if you could pm me a price to re-map and fit lauch control and anti-lag and i'll have a chat with him about using his rollers