I just brought some bc br series can I adjust the height why there all on car ? Also what is a good damping adjustment on a v3 type r ? Any info be great cheers rob

 

set the damping straight to soft and work from there to your own prefference

and yes you can set the height while theyre on the car

 

How you adjust the height when on car as don't you have to twist the bottom of the leg ? Cheers for help mste

 

I think you loosen the nut and twist the whole stut up or down.

 

Be careful doing height adjustments:
1. ALL dampers MUST be set the same.
2. You may upset the suspension settings.
3. Go too low and it'll roll MORE, not less.
4. Difficult to put back to standard once you start messing.

If you know what you are at, fair enough, but you don't sound as if you do?

 

I done 4 lots of coilovers on 2 scoobys and skylines but never bc s that adjust ride height by spinning the bottom of suspension leg? But surely u don't measure them make sure same amount of threads then fit everything see if happy if not all off bottom bolts out spin them again then rebolt to the hub again etc .

 

you can slacken both lock nuts and tighten them together and use them to screw the damper through the bottom mount without disturbing top or bottom mount

 

this is how its done