Subaru tuners close to Basingstoke
#1
Scooby Regular
Thread Starter
Join Date: Dec 2012
Location: Basingstoke
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Subaru tuners close to Basingstoke
Hi guys pretty new member had my 2008 Sti for a few months and want to up the power now. Does anyone have any recommendations of places near me?
Second question...what upgrades are worth doing to my car? Thanks guys!
Btw it's a standard 300bhp Sti
Second question...what upgrades are worth doing to my car? Thanks guys!
Btw it's a standard 300bhp Sti
#4
Scooby Regular
iTrader: (3)
Join Date: May 2005
Location: Southampton(ish)
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
Yup .. I've used Len and Mark at S4U quite a few times and am very happy ... plus as someone said .. Simon from Jolly Green Monster (JGM) maps on the RR there too. Indeed he was there just yesterday from looking at FB.
Simon also maps a lot at Surrey Rolling Road too .. just up the M3 .. Plus you've got Bob Rawle along in Swindon for on the road mapping. I am sure there are other mappers that are around too .... so .. spoilt for choice really!!
Simon also maps a lot at Surrey Rolling Road too .. just up the M3 .. Plus you've got Bob Rawle along in Swindon for on the road mapping. I am sure there are other mappers that are around too .... so .. spoilt for choice really!!
#5
Scooby Regular
iTrader: (6)
Join Date: May 2012
Location: Cardiff
Posts: 3,221
Likes: 0
Received 0 Likes
on
0 Posts
Ported headers
Harvey trick uppipe
Panel filter
Fuel pump ( may not be needed )
Full decat exhaust 2.5" / 3" system
Remap
First stage of power upgrades listed above
Most mappers will travel, drop them a pm
Harvey trick uppipe
Panel filter
Fuel pump ( may not be needed )
Full decat exhaust 2.5" / 3" system
Remap
First stage of power upgrades listed above
Most mappers will travel, drop them a pm
#7
Scooby Regular
iTrader: (6)
Join Date: May 2012
Location: Cardiff
Posts: 3,221
Likes: 0
Received 0 Likes
on
0 Posts
You don't strictly need the headers but they certainly help with spool, although if your handy on the tools then give them a port yourself, although the Harvey up pipe will certainly help spool.
The rest depends on what you buy really, if you want new or buy used etc, if you look through the cars breaking section it can save you a lot of money, obviously I would suggest buying a new panel filter and pump. At a guess I would say the above can be bought for £300-£400 if you look hard enough, also depends if your patient or if you want it done yesterday
The biggest chunk will be the mapping, have you looked at what options there are available to you.
The rest depends on what you buy really, if you want new or buy used etc, if you look through the cars breaking section it can save you a lot of money, obviously I would suggest buying a new panel filter and pump. At a guess I would say the above can be bought for £300-£400 if you look hard enough, also depends if your patient or if you want it done yesterday
The biggest chunk will be the mapping, have you looked at what options there are available to you.
Trending Topics
#8
Scooby Regular
Thread Starter
Join Date: Dec 2012
Location: Basingstoke
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply is the 400 inclusive of headers? I haven't really seen many products for the hatch if I'm honest so I am at a bit of a loss! I used to have an old blob eye wrx and billy bolt on bits were easy to find but this hatch proves rather more tricky
#9
I'm just down the road from you bud, I used Enginetuner @ Plymouth a few weeks ago for my mapping etc.
they had a 330s hatch down there what I was there and that came out of there with 500hp so fed worth a call and a chat.
Cheers
they had a 330s hatch down there what I was there and that came out of there with 500hp so fed worth a call and a chat.
Cheers
#13
Scooby Regular
#19
Scooby Regular
iTrader: (2)
Join Date: Oct 2002
Location: Aldershot
Posts: 1,861
Likes: 0
Received 0 Likes
on
0 Posts
Its your first map that's going to cost as you need a license as well as the mapping time and the rollers. That'll be the price your quoted. If you do open source then there are no license fee's
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM