littlebit

Fitted my gauges today all are working except oil pressure the gauge reads 0psi start up sequence is all or any help would be great

wrx fifer

iTrader: (34)

a bit info on how you fitted it may help, i.e sandwich plate or under alternator, but I would suggest the connector at the back of the gauge first port of call

littlebit

It's fitted under the alternator with a fitting kit with the wires pluged into sensor and in the back of the gauge correctly

MattyB1983

iTrader: (51)

Is it a stepper gauge.
The non steppers use a cheapy sender (large round silver thing with two thumb screws on it ).
If its this sender then make sure the wires are on the correct terminals and the negative goes to a good earth in the engine bay.