Checking fault codes (classic with esl)
#1
Scooby Regular
Thread Starter
iTrader: (9)
Join Date: Feb 2007
Location: wirral
Posts: 2,704
Likes: 0
Received 0 Likes
on
0 Posts
Checking fault codes (classic with esl)
Can anyone tell me how to check fault codes as mine has the esl daughter board on it. My abs light is on . Fluid is fine, recently changed and in getting a rubbing feeling when turning right out of junctions. Thinking maybe driveshaft, cv etc? Help appreciated
Dan
Dan
#2
Unmapped 12.4s @ 105
iTrader: (29)
Join Date: Apr 2005
Location: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Posts: 11,776
Likes: 0
Received 4 Likes
on
4 Posts
Driveshaft etc won't flag a fault code.
Send Andy a PM, and ask him how to check them.
https://www.scoobynet.com/member.php?u=66143
Send Andy a PM, and ask him how to check them.
https://www.scoobynet.com/member.php?u=66143
#4
If you have the software and it's the latest board you there is a code checker in the software, or you can read the CEL flashes as per the standard diagnostic, but as Micky says ABS has a seperate control unit, so the engine ECU won't report ABS codes.
#7
Scooby Regular
iTrader: (7)
Hi Dan
You need someone who have SSM(Subaru Select Monitor),only via this you will know what ABS error you have
Second option is you can buy OBD cable from eBay and use this program/SW FreeSSM,have look on this thread
http://www.subaruoutback.org/forums/...r-ecm-tcu.html
Thanks,Jura
You need someone who have SSM(Subaru Select Monitor),only via this you will know what ABS error you have
Second option is you can buy OBD cable from eBay and use this program/SW FreeSSM,have look on this thread
http://www.subaruoutback.org/forums/...r-ecm-tcu.html
Thanks,Jura
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
1
17 September 2015 10:42 AM