Very high spec race RA breaking
#1
Very high spec race RA breaking
OK here goes I have decided to break my Race RA and have an initial list of parts below. There will be more once I get round to finding everything. The prices do not include postage (unless stated) or paypal fees. If paying with paypal you will need to cover any fees or send as a gift. I will also accept payment by bank transfer but appreciate most people do not like paying that way which I fully understand. There are obviously some parts that are either very large, very heavy or very expensive so please think about this as some parts may not be able to be posted. For large value items that can be posted I will post at cost but will want the items fully insured. If you do not want to pay the extra for insurance I am happy to box the items and let you organise your own courier at your own risk. Given the number of parts and associated queries I have set up an email address to try and centralise things so happy to take PM's here or by email if the inbox is full. archraparts@gmail.com
I will start adding pictures as quickly as I can but feel free to email if there are no pics up of an item you are interested in.
Shell/Chassis
Facelift classic front bumper and Splitter with fog covers, excellent condition 230 white. Couple of pictures of it before I removed it also shows original RA doors£150
One off Pre Facelift reverse louvered bonnet vent from my RA. This was custom made by frayz on here so this is a one and only chance to get one of these its a must if you have a FMIC to expel the air.
£200 delivered
Classic crystal smoked side Indicator repeaters in excellent condition.
£30 delivered
After market front grill in 230 white, ideal for maximising air through the radiator I am pretty sure its for facelift classics but I had it on my RA with prefacelift lights will try and find a picture with it on the car. It is not perfect does have some very minor cracks but not really visible when fitted. Ideal for a track car.
£40 delivered
Pre facelift LH fog light cover in 230 White in excellent condition and paint is very good.
£40 delivered
Facelift fog light cover with induction scoop built in, again in 230 white, I had this painted then never fitted it so paint is like new. Cant remember which side but pretty sure its drivers side
£45 delivered
Brand new Carbon Fibre Hatch front grill, its not a fibreglass shell with carbon over the top it definitely appears to be proper carbon lay up. It is a really nice item, not test fitted it but it really is very nice. It is listed for a Hatch WRX not sure if there is a difference between the Hatch STI and/or the Saloon.
Looking for £100 delivered
Drivetrain
Drivers side R180 newage 100 PCD rear hub with good bearings. £85 delivered
Rear R180 driveshafts, 2 available SOLD
Front Hawkeye WRX driveshafts, fit above gearbox and classic ABS hubs and non widetrack newage ABS hubs, these also work with Hatch WRX front hubs with a custom spacers which I have. To clarify these shafts are a direct fit for all 6 speed gearboxes which do not have stub shafts fitted i.e widetrack boxes or esrlier which need a male ended shaft at the gearbox end, the hub end will fit all non widetrack ABS hubs easy plug and play solution if fitting a hawk type 6 speed box. I have used this type of shaft at in excess of 500 Lb/ft of torque and never had an issue with shafts. 2 available SOLD
Newage rear diff diff brace £40
I have a set of 4 Eibach 10mm hub centric pro spacers and extended wheel studs. These retail at between £90 and £100 per pair delivered. I have used these on my RA but not often so are in excellent condition. They are 100 PCD but are multi-drilled but not sure if they do fit 114 PCD cars. .
SOLD
https://www.demon-tweeks.co.uk/perfo...m12x125-thread
Genuine Subaru newage R180 rear wheel bearing kits. These are £70 plus delivery from ICP. SOLD
Engine
Mocal oil cooler set up from my RA. It was mounted in the drivers side inner wing and ducted from the bumper into the custom made cooler duct.
The kit will come with the Mocal 25 row 115mm core which I bought new from Think Automotive last November. It also has a mocal thermostatic sandwich plate and AN10 fittings, hoses from the thermostatic plate to the cooler with heavy duty heat sleeve, and the fitting between the sandwich plate and oil filter. It also has a custom duct which was made by Frays on here to suit this oil cooler core.
This will need a new seal for the sandwich plate and the fitting from the block to the sandwich plate, the seal is approx £2 and cant see the fitting being much more than £5.
£225 delivered
Modified classic water cross over pipe. This has been brazed at the take of for the heater radiator so ideal for anyone who has removed the heater.
The sensors are not included. The tape in the picture is some heat reflective tape which I will remove.
£25 delivered
Classic 2 pin Alternators x 2, all fully functional and either powder coated silver or painted silver all in excellent condition. £40 each
Powder coated alternator sold
Newage Coil packs for 2.5 heads, can be used with 2Lt heads its only the dust boot length that is different £70 delivered per set of 4
I have 2 brand new cam sensors for 2.5 Lt single AVCS heads
£70 each delivered
I have two used cam sensors for 2.5Lt single AVCS heads sensors but they work fine I have tried them on my car before I removed the engine. One has the securing lug for the plug removed but they are a tight fit anyway so shouldn't be an issue £60 delivered for the pair
If you need any other sensors just ask I will probably have them, certainly have knock sensors, newage abs sensors etc etc
HDI Gen 2 classic FMIC and custom carbon dipped custom pipework, ceramic coated under manifold to turbo link pipe and hoses. This is designed to be used with a reversed manifold, rotated turbo set up on a classic with pipework going under the headlights. It comes complete with hoses and clamps as well as a Forge dump valve. This has bosses fitted for a NOS jet and an air inlet temp sensor(sensor not included). Shown fitted to a newage rotated inlet but the same kit was previously fitted to the car with a rotated early phase one inlet, the only think that would need changed t fit to a rotated classic inlet is the throttle hose pipe. £400
Samco top and bottom radiator hoses for classic Impreza in really good condition
£55 delivered
I have my RCM lightweight pulley kit for sale, it is in really nice condition apart from a very slight bit of damage on the power steering pulley where I used a screw driver to hold the pulley from turning while I undone the pulley nut at an event, you can see where there is a mark from the screw diriver and a very slight surface crack on one of the areas between the holes . It is hardly noticeable and in no way affects the the integrity of the pulley. The kits are listed for classic and newage and I think the only difference was the power steering pump pulley but no idea what the difference is but this kit was fitted with a newage power steering pump.
SOLD
Turbo Blanket for GT30 size turbo, may fit others but it was fitted to my GT30, it is a bit tatty in places but still works very well £35 delivered
Suspension/Steering
Whiteline Front newage non widetrack anti roll Bar 24mm excellent condition. £107 delivered
Whiteline Front drop links. £55 delivered
Rear adjustable rose jointed trailing arms in good condition but could do with re powder coating. Price reduced SOLD
Brakes/Wheels
Gloss black 17” Pro race 1.2 wheels. These are 17”x 9” ET30 100 PCD with 245x40x17 GG compound R888’s. These are approximately 1/3rd worn. The wheels are in mint condition, they had a few minor surface marks on paint after a trip to the gravel it was only cosmetic in the paint but I had them completely refurbished gloss black on the outside and matt on the inner and are now as good as new. The price is for a set of 5 wheels but only 4 tyres so a spare wheel is included which is brand new and still boxed. £800
Gloss black 17” Pro race 1.2 wheels. These are 17”x 9” ET30 100 PCD with 245x45x17 Uniroyal rainsport 3 tyres. The tyres were fitted to the wheels but have never been fitted to a car so the wheels and tyres are in effect new. Sold
Gloss Black Rota Force 8Jx17 ET48 alloys. These were a spare set of track wheels which are in generally good condition no buckles or kerbing, one had a slight repair but in no way affects the wheel and cant really be seen but being 100% honest. These are fitted with a set of 220x640x17 Dunlop x22 tyres which are at worst 1/4 worn, these are one of the best track tyres I have used and are no longer available.
£350 delivered for the X22's and £200 delivered for the Rota's or £520 delivered together.
I am willing to split wheels from tyres
Pair of newage R160 rear hubs with good bearings ideal if going to a 2 pot or Brembo rear set up on a classic or replacement for newage WRX. £100 for the pair plus delivery at cost.
I am finding bits all the time so will add them as I find them
I will start adding pictures as quickly as I can but feel free to email if there are no pics up of an item you are interested in.
Shell/Chassis
Facelift classic front bumper and Splitter with fog covers, excellent condition 230 white. Couple of pictures of it before I removed it also shows original RA doors£150
One off Pre Facelift reverse louvered bonnet vent from my RA. This was custom made by frayz on here so this is a one and only chance to get one of these its a must if you have a FMIC to expel the air.
£200 delivered
Classic crystal smoked side Indicator repeaters in excellent condition.
£30 delivered
After market front grill in 230 white, ideal for maximising air through the radiator I am pretty sure its for facelift classics but I had it on my RA with prefacelift lights will try and find a picture with it on the car. It is not perfect does have some very minor cracks but not really visible when fitted. Ideal for a track car.
£40 delivered
Pre facelift LH fog light cover in 230 White in excellent condition and paint is very good.
£40 delivered
Facelift fog light cover with induction scoop built in, again in 230 white, I had this painted then never fitted it so paint is like new. Cant remember which side but pretty sure its drivers side
£45 delivered
Brand new Carbon Fibre Hatch front grill, its not a fibreglass shell with carbon over the top it definitely appears to be proper carbon lay up. It is a really nice item, not test fitted it but it really is very nice. It is listed for a Hatch WRX not sure if there is a difference between the Hatch STI and/or the Saloon.
Looking for £100 delivered
Drivetrain
Drivers side R180 newage 100 PCD rear hub with good bearings. £85 delivered
Rear R180 driveshafts, 2 available SOLD
Front Hawkeye WRX driveshafts, fit above gearbox and classic ABS hubs and non widetrack newage ABS hubs, these also work with Hatch WRX front hubs with a custom spacers which I have. To clarify these shafts are a direct fit for all 6 speed gearboxes which do not have stub shafts fitted i.e widetrack boxes or esrlier which need a male ended shaft at the gearbox end, the hub end will fit all non widetrack ABS hubs easy plug and play solution if fitting a hawk type 6 speed box. I have used this type of shaft at in excess of 500 Lb/ft of torque and never had an issue with shafts. 2 available SOLD
Newage rear diff diff brace £40
I have a set of 4 Eibach 10mm hub centric pro spacers and extended wheel studs. These retail at between £90 and £100 per pair delivered. I have used these on my RA but not often so are in excellent condition. They are 100 PCD but are multi-drilled but not sure if they do fit 114 PCD cars. .
SOLD
https://www.demon-tweeks.co.uk/perfo...m12x125-thread
Genuine Subaru newage R180 rear wheel bearing kits. These are £70 plus delivery from ICP. SOLD
Engine
Mocal oil cooler set up from my RA. It was mounted in the drivers side inner wing and ducted from the bumper into the custom made cooler duct.
The kit will come with the Mocal 25 row 115mm core which I bought new from Think Automotive last November. It also has a mocal thermostatic sandwich plate and AN10 fittings, hoses from the thermostatic plate to the cooler with heavy duty heat sleeve, and the fitting between the sandwich plate and oil filter. It also has a custom duct which was made by Frays on here to suit this oil cooler core.
This will need a new seal for the sandwich plate and the fitting from the block to the sandwich plate, the seal is approx £2 and cant see the fitting being much more than £5.
£225 delivered
Modified classic water cross over pipe. This has been brazed at the take of for the heater radiator so ideal for anyone who has removed the heater.
The sensors are not included. The tape in the picture is some heat reflective tape which I will remove.
£25 delivered
Classic 2 pin Alternators x 2, all fully functional and either powder coated silver or painted silver all in excellent condition. £40 each
Powder coated alternator sold
Newage Coil packs for 2.5 heads, can be used with 2Lt heads its only the dust boot length that is different £70 delivered per set of 4
I have 2 brand new cam sensors for 2.5 Lt single AVCS heads
£70 each delivered
I have two used cam sensors for 2.5Lt single AVCS heads sensors but they work fine I have tried them on my car before I removed the engine. One has the securing lug for the plug removed but they are a tight fit anyway so shouldn't be an issue £60 delivered for the pair
If you need any other sensors just ask I will probably have them, certainly have knock sensors, newage abs sensors etc etc
HDI Gen 2 classic FMIC and custom carbon dipped custom pipework, ceramic coated under manifold to turbo link pipe and hoses. This is designed to be used with a reversed manifold, rotated turbo set up on a classic with pipework going under the headlights. It comes complete with hoses and clamps as well as a Forge dump valve. This has bosses fitted for a NOS jet and an air inlet temp sensor(sensor not included). Shown fitted to a newage rotated inlet but the same kit was previously fitted to the car with a rotated early phase one inlet, the only think that would need changed t fit to a rotated classic inlet is the throttle hose pipe. £400
Samco top and bottom radiator hoses for classic Impreza in really good condition
£55 delivered
I have my RCM lightweight pulley kit for sale, it is in really nice condition apart from a very slight bit of damage on the power steering pulley where I used a screw driver to hold the pulley from turning while I undone the pulley nut at an event, you can see where there is a mark from the screw diriver and a very slight surface crack on one of the areas between the holes . It is hardly noticeable and in no way affects the the integrity of the pulley. The kits are listed for classic and newage and I think the only difference was the power steering pump pulley but no idea what the difference is but this kit was fitted with a newage power steering pump.
SOLD
Turbo Blanket for GT30 size turbo, may fit others but it was fitted to my GT30, it is a bit tatty in places but still works very well £35 delivered
Suspension/Steering
Whiteline Front newage non widetrack anti roll Bar 24mm excellent condition. £107 delivered
Whiteline Front drop links. £55 delivered
Rear adjustable rose jointed trailing arms in good condition but could do with re powder coating. Price reduced SOLD
Brakes/Wheels
Gloss black 17” Pro race 1.2 wheels. These are 17”x 9” ET30 100 PCD with 245x40x17 GG compound R888’s. These are approximately 1/3rd worn. The wheels are in mint condition, they had a few minor surface marks on paint after a trip to the gravel it was only cosmetic in the paint but I had them completely refurbished gloss black on the outside and matt on the inner and are now as good as new. The price is for a set of 5 wheels but only 4 tyres so a spare wheel is included which is brand new and still boxed. £800
Gloss black 17” Pro race 1.2 wheels. These are 17”x 9” ET30 100 PCD with 245x45x17 Uniroyal rainsport 3 tyres. The tyres were fitted to the wheels but have never been fitted to a car so the wheels and tyres are in effect new. Sold
Gloss Black Rota Force 8Jx17 ET48 alloys. These were a spare set of track wheels which are in generally good condition no buckles or kerbing, one had a slight repair but in no way affects the wheel and cant really be seen but being 100% honest. These are fitted with a set of 220x640x17 Dunlop x22 tyres which are at worst 1/4 worn, these are one of the best track tyres I have used and are no longer available.
£350 delivered for the X22's and £200 delivered for the Rota's or £520 delivered together.
I am willing to split wheels from tyres
Pair of newage R160 rear hubs with good bearings ideal if going to a 2 pot or Brembo rear set up on a classic or replacement for newage WRX. £100 for the pair plus delivery at cost.
I am finding bits all the time so will add them as I find them
Last edited by Arch; 17 December 2017 at 03:17 PM.
#5
and more
The DJ wing set up will include the rear Seibon carbon bootlid which has been carbon wrapped as the finish went milky, it will also have the in boot supports that ensure all the load from the wing is directed down onto the chassis legs. These along with the uprights were custom made and were not cheap to make and took hours to fettle and fit. This offers a direct bolt in solution for a classic.
The DJ wing set up will include the rear Seibon carbon bootlid which has been carbon wrapped as the finish went milky, it will also have the in boot supports that ensure all the load from the wing is directed down onto the chassis legs. These along with the uprights were custom made and were not cheap to make and took hours to fettle and fit. This offers a direct bolt in solution for a classic.
Last edited by Arch; 08 August 2017 at 07:42 PM.
Trending Topics
#14
Jay no the arms will not only fit a classic or non widetrack but they need to be used together with the rear roll bar and ball type drop links.
Corky what roll bar do you have is it the same a set the one in my pictures below with the straight ends if not it wont work with these lateral arms ?
The arms may have sold and the roll centre kit but will know tomorrow.
Harry the injectors are prob sold again will know tomorrow.
Corky what roll bar do you have is it the same a set the one in my pictures below with the straight ends if not it wont work with these lateral arms ?
The arms may have sold and the roll centre kit but will know tomorrow.
Harry the injectors are prob sold again will know tomorrow.
Last edited by Arch; 03 August 2017 at 10:14 PM.