Classic parts clear out
#1
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: May 2005
Location: Portsmouth
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Classic parts clear out
Right, I'm having a clear out of all my impreza parts - These are primarily for classics, but some items are interchangeable with newage's
I would REALLY like this all gone in one go, and I would be willing to offer a SIZABLE discount if someone wanted it as a job lot!
Some of the items are pretty hard to price, as they dont have much, or any value so I'd rather not post them as its too much hassle - But if someone wants to come collect them for a reasonable donation, they are welcome to them.
The items with a price on them are open to serious offers - All items will need a good clean, but they were in Good Working Order and functional when removed
3 x ver5 inlet manifolds - £15 each
3 x ver5 engine harness - £5 Each
Shown Above
2 x alternators - £10 Each
2 x air con pump - £10 Each
1 x metal header tank - £10 Each
1 x ver5 coil pack - £10 Each
2 x crank pulleys - £5 each
2 x sets of ver5 HT Leads - £5 each
2 x sets of exhaust gaskets (headers middle joint) - Donation
2 x aircon hoses - Donation
1 x pair of ver5 heads with cams - £50
1 x EJ20 short block (bottom end is gone) - £50
1 x set OEM Headers - £10
1 x OEM flywheel - £10
1 x K&N induction filter - £20
1 x set of cam pulleys for ver5 - £25
1 x adjustable VTA DV - £30
1 x HKS SSQV DV - £45
1 x 440cc injectors - £40
1 x TD04L turbo - £50
1 x spats strut brace - £15
1 x ver5 WRX TMIC (pretty beaten up) - Donation
1 x cat down pipe (shortened) - Donation
1 x pair Turbo2000 rear lights - £15
1 x E3 ECU - £15
1 x set of orange side repeaters - Donation
Exhaust heat shields - Donation
Various coolant channels - Thin Black ones sold - Donation
Various brackets for ancillaries - Donation
All items are located in Gosport, Nr Portsmouth. I don't really want to have to post anything, because for the most part - these items are heavy as hell! If you do want them posted, all prices are EXCLUDING postage!
Thanks
Mark
I would REALLY like this all gone in one go, and I would be willing to offer a SIZABLE discount if someone wanted it as a job lot!
Some of the items are pretty hard to price, as they dont have much, or any value so I'd rather not post them as its too much hassle - But if someone wants to come collect them for a reasonable donation, they are welcome to them.
The items with a price on them are open to serious offers - All items will need a good clean, but they were in Good Working Order and functional when removed
3 x ver5 inlet manifolds - £15 each
3 x ver5 engine harness - £5 Each
Shown Above
2 x alternators - £10 Each
2 x air con pump - £10 Each
1 x metal header tank - £10 Each
1 x ver5 coil pack - £10 Each
2 x crank pulleys - £5 each
2 x sets of ver5 HT Leads - £5 each
2 x sets of exhaust gaskets (headers middle joint) - Donation
2 x aircon hoses - Donation
1 x pair of ver5 heads with cams - £50
1 x EJ20 short block (bottom end is gone) - £50
1 x set OEM Headers - £10
1 x OEM flywheel - £10
1 x K&N induction filter - £20
1 x set of cam pulleys for ver5 - £25
1 x adjustable VTA DV - £30
1 x HKS SSQV DV - £45
1 x 440cc injectors - £40
1 x TD04L turbo - £50
1 x spats strut brace - £15
1 x ver5 WRX TMIC (pretty beaten up) - Donation
1 x cat down pipe (shortened) - Donation
1 x pair Turbo2000 rear lights - £15
1 x E3 ECU - £15
1 x set of orange side repeaters - Donation
Exhaust heat shields - Donation
Various coolant channels - Thin Black ones sold - Donation
Various brackets for ancillaries - Donation
All items are located in Gosport, Nr Portsmouth. I don't really want to have to post anything, because for the most part - these items are heavy as hell! If you do want them posted, all prices are EXCLUDING postage!
Thanks
Mark
Last edited by jr758774c; 07 April 2014 at 04:15 PM.
#6
Scooby Newbie
Join Date: Dec 2013
Location: Portsmouth
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
PM me your address. I'll pop round Saturday or one evening, I'm in Portsmouth too.
Definitely take one of the coil packs, and might have a few other bits off you as spares.
Cheers
Definitely take one of the coil packs, and might have a few other bits off you as spares.
Cheers
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: May 2005
Location: Portsmouth
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Guys, Just to clarify - Like I said, I would ideally like this sold as one job lot - However, it looks like there is some interest in the parts individually, so If its OK with those who have expressed an interest, I will keep waiting for a job lot buyer untill Sunday, and if no one expresses any interest, then I'll start selling bits on their own and start packaging up bits and bobs.
Please note that I'd rather make 1 Post office run a week, so there may be a wait on items for a few days before they are posted. Hope thats OK
Cheers
Mark
Please note that I'd rather make 1 Post office run a week, so there may be a wait on items for a few days before they are posted. Hope thats OK
Cheers
Mark
#13
Scooby Regular
iTrader: (7)
Join Date: Feb 2007
Location: Ilkley, Yorkshire
Posts: 377
Likes: 0
Received 0 Likes
on
0 Posts
I'm after all the thin coolant channels/water pipes. Also looking for the pipe that sits across the front between oil cooler & thermostat/wp if you have it?
Also are the alts 2 pin or 3 pin?
Also are the alts 2 pin or 3 pin?
#14
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: May 2005
Location: Portsmouth
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
Gents, All of this is now up for sale piece by piece as no taker has come forward for the whole lot. For all that have expressed an interest, please re-affirm your interest, and I'll start sending out Paypal invoices and updating the list etc...
Please note, that there may be a few days wait on postage, as I'll be hoarding all items and posting them all once a week.
Cheers
Mark
Please note, that there may be a few days wait on postage, as I'll be hoarding all items and posting them all once a week.
Cheers
Mark
#16
Scooby Regular
iTrader: (19)
this is what I am after mate
I would be willing to have one set cam covers , header tank and if you have any brackets that hold the alternator (the right hand side bracket, not the PAS pump ) cheers. Also the bracket for the boost solonoid Will cover postage obviously
thanks
I would be willing to have one set cam covers , header tank and if you have any brackets that hold the alternator (the right hand side bracket, not the PAS pump ) cheers. Also the bracket for the boost solonoid Will cover postage obviously
thanks
#24
Scooby Regular
iTrader: (2)
Join Date: Apr 2007
Location: NE England
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
is this inlet manifold assembly still available:
http://s108.photobucket.com/user/jr7...497cc.jpg.html
or did it sell?
Mike
http://s108.photobucket.com/user/jr7...497cc.jpg.html
or did it sell?
Mike
#25
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: May 2005
Location: Portsmouth
Posts: 768
Likes: 0
Received 0 Likes
on
0 Posts
is this inlet manifold assembly still available:
http://s108.photobucket.com/user/jr7...497cc.jpg.html
or did it sell?
Mike
http://s108.photobucket.com/user/jr7...497cc.jpg.html
or did it sell?
Mike
#30
Scooby Regular
Join Date: Sep 2013
Location: Co. Durham
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Is hks still available also are orange side repeaters still there and are they the same shape and colour that my p reg import wrx would of had as factory? Random question I know.