MD321T Billet Turbo & Supporting Mods & Sti Engine
#1
MD321T Billet Turbo & Supporting Mods & Sti Engine
All listed parts are still on the car and will be removed early in the new year. The engine / turbo can be seen and heard running prior to removal for peace of mind. All items are in perfect working order and are only being removed due to a new 2.35 motor going in and im also converting to a rotated setup.
MD321T Billet Turbo with a Zircotec ceramic coated exhaust housing.
I purchased this turbo in August last year from a respected member of the Subaru community. He purchased the turbo new from Mark at Lateral Performance at the cost of £1750 and only used the turbo for 1K miles, most of which were to run in a new engine before deciding to go for a larger turbo setup.
I have covered another 6k miles since i purchased it so its only covered 7k miles from new and as such is still in perfect working order. On my current 2.0 setup it makes 446bhp on v-power at 1.7bar. I have the original build sheet and receipt from when i purchased it.... £900 ( SOLD)
Harvey Smith (Trick) 3 bolt up pipe, covered less than 5k miles ...£80 SOLD
Sard 650cc Fuel Injectors, newage fitment, perfect working order.... £150
SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld) Sold
RCM Induction Kit. Newage fitment, covered less than 5k... £90 (£210 new) Sold
2004 Sti Long Motor. Covered 86k, full service history, 100% reliable and well looked after engine. Starts first time every time with, no nasty knocks or rattles, no oil or coolant usage. This was a stock motor until 80k when i purchased the car. Before i had the car remapped to suit the above turbo i had it checked over by Mark at TDR (Thwaites Developments Racing), the engine was and still is performing perfectly, runs very quiet and makes the power its expected to make. Long engine only so no ancillaries etc, the heads and block will be left assembled so a nice easy straight drop in for somebody on a budget.
Can be seen and heard running.. £800 SOLD
Collection preferred from Redditch or Warwick, postage and paypal fees to be added.
Im also looking for a rotated exhaust setup and a set of large (1000cc+) top feed injectors that i would take into a deal
.
MD321T Billet Turbo with a Zircotec ceramic coated exhaust housing.
I purchased this turbo in August last year from a respected member of the Subaru community. He purchased the turbo new from Mark at Lateral Performance at the cost of £1750 and only used the turbo for 1K miles, most of which were to run in a new engine before deciding to go for a larger turbo setup.
I have covered another 6k miles since i purchased it so its only covered 7k miles from new and as such is still in perfect working order. On my current 2.0 setup it makes 446bhp on v-power at 1.7bar. I have the original build sheet and receipt from when i purchased it.... £900 ( SOLD)
Harvey Smith (Trick) 3 bolt up pipe, covered less than 5k miles ...£80 SOLD
Sard 650cc Fuel Injectors, newage fitment, perfect working order.... £150
SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld) Sold
RCM Induction Kit. Newage fitment, covered less than 5k... £90 (£210 new) Sold
2004 Sti Long Motor. Covered 86k, full service history, 100% reliable and well looked after engine. Starts first time every time with, no nasty knocks or rattles, no oil or coolant usage. This was a stock motor until 80k when i purchased the car. Before i had the car remapped to suit the above turbo i had it checked over by Mark at TDR (Thwaites Developments Racing), the engine was and still is performing perfectly, runs very quiet and makes the power its expected to make. Long engine only so no ancillaries etc, the heads and block will be left assembled so a nice easy straight drop in for somebody on a budget.
Can be seen and heard running.. £800 SOLD
Collection preferred from Redditch or Warwick, postage and paypal fees to be added.
Im also looking for a rotated exhaust setup and a set of large (1000cc+) top feed injectors that i would take into a deal
.
Last edited by Dubzy; 04 January 2016 at 05:49 PM.
Trending Topics
#8
Interested in the turbo intake hose, are they as good as samco?
Cheers
Just did a search I'll have it
I assume it has all the standard take offs
Thanks
Paypal?
Cheers
Just did a search I'll have it
I assume it has all the standard take offs
Thanks
Paypal?
Last edited by Steve001; 18 December 2015 at 01:38 PM.
#9
Can dig you some out if your interested but turbo is provisionally sold now.
Rcm Kit sold now im afraid
It wont be taken off the car until january mate but a small deposit will hold it if you want it and yes has all take offs
All pms replied
All pms replied
#11
January is not a problem re intake hose
PM me your PayPal details and I'll send across deposit or payment in full if that suits
Cheers PM sent too
PM me your PayPal details and I'll send across deposit or payment in full if that suits
Cheers PM sent too
Last edited by Steve001; 19 December 2015 at 02:25 AM.
#16
#20
All listed parts are still on the car and will be removed early in the new year. The engine / turbo can be seen and heard running prior to removal for peace of mind. All items are in perfect working order and are only being removed due to a new 2.35 motor going in and im also converting to a rotated setup.
MD321T Billet Turbo with a Zircotec ceramic coated exhaust housing.
I purchased this turbo in August last year from a respected member of the Subaru community. He purchased the turbo new from Mark at Lateral Performance at the cost of £1750 and only used the turbo for 1K miles, most of which were to run in a new engine before deciding to go for a larger turbo setup.
I have covered another 6k miles since i purchased it so its only covered 7k miles from new and as such is still in perfect working order. On my current 2.0 setup it makes 446bhp on v-power at 1.7bar. I have the original build sheet and receipt from when i purchased it.... £900 (Provisionally Sold)
Harvey Smith (Trick) 3 bolt up pipe, covered less than 5k miles ...£80 ( £165 new from ASP)
Sard 650cc Fuel Injectors, newage fitment, perfect working order.... £150
SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld) Sold
RCM Induction Kit. Newage fitment, covered less than 5k... £90 (£210 new) Sold
2004 Sti Long Motor. Covered 86k, full service history, 100% reliable and well looked after engine. Starts first time every time with, no nasty knocks or rattles, no oil or coolant usage. This was a stock motor until 80k when i purchased the car. Before i had the car remapped to suit the above turbo i had it checked over by Mark at TDR (Thwaites Developments Racing), the engine was and still is performing perfectly, runs very quiet and makes the power its expected to make. Long engine only so no ancillaries etc, the heads and block will be left assembled so a nice easy straight drop in for somebody on a budget.
Can be seen and heard running.. £800
Collection preferred from Redditch or Warwick, postage and paypal fees to be added.
Im also looking for a rotated exhaust setup and a set of large (1000cc+) top feed injectors that i would take into a deal
.
MD321T Billet Turbo with a Zircotec ceramic coated exhaust housing.
I purchased this turbo in August last year from a respected member of the Subaru community. He purchased the turbo new from Mark at Lateral Performance at the cost of £1750 and only used the turbo for 1K miles, most of which were to run in a new engine before deciding to go for a larger turbo setup.
I have covered another 6k miles since i purchased it so its only covered 7k miles from new and as such is still in perfect working order. On my current 2.0 setup it makes 446bhp on v-power at 1.7bar. I have the original build sheet and receipt from when i purchased it.... £900 (Provisionally Sold)
Harvey Smith (Trick) 3 bolt up pipe, covered less than 5k miles ...£80 ( £165 new from ASP)
Sard 650cc Fuel Injectors, newage fitment, perfect working order.... £150
SFS Silicon Intake Pipe, newage fitment (red) quality part in good used condition...£70 (£240 new from scoobyworld) Sold
RCM Induction Kit. Newage fitment, covered less than 5k... £90 (£210 new) Sold
2004 Sti Long Motor. Covered 86k, full service history, 100% reliable and well looked after engine. Starts first time every time with, no nasty knocks or rattles, no oil or coolant usage. This was a stock motor until 80k when i purchased the car. Before i had the car remapped to suit the above turbo i had it checked over by Mark at TDR (Thwaites Developments Racing), the engine was and still is performing perfectly, runs very quiet and makes the power its expected to make. Long engine only so no ancillaries etc, the heads and block will be left assembled so a nice easy straight drop in for somebody on a budget.
Can be seen and heard running.. £800
Collection preferred from Redditch or Warwick, postage and paypal fees to be added.
Im also looking for a rotated exhaust setup and a set of large (1000cc+) top feed injectors that i would take into a deal
.
#21
Thread
Thread Starter
Forum
Replies
Last Post
scottydouk
Subaru Parts
4
22 November 2015 06:31 PM
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 08:03 AM