Best Turbo
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: North Devon
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Best Turbo
Just fitted 2.1 stroker next stage turbo etc going for 450-480 Bhp what turbo would you use and why also what injectors 800 or 1000cc ?
Thoughts please !! in a dilema !!
Cheers Woza !!
Thoughts please !! in a dilema !!
Cheers Woza !!
#2
Scooby Regular
iTrader: (51)
You would be fine with 800cc injectors at that power level that you are thinking about,you have not specified rotated or standard position so if it is a standard position turbo a MDX series turbo or a SC billet variant would be my choice or if it's for a rotated set up a GT30 billet would be my choice.SJ.
#7
Scooby Regular
iTrader: (59)
It all depends what you want from the car and what your budget is. I have had a good few turbo's on my car including an SC GT3076 it is a very good turbo but is not in the same league in terms of spool and top end power as the Owen Developments turbo's. The standars portion Owen turbo's have been proven in a good number of sprint cars as well as the rotated items. I have a custom M spec GT30 which spools like you would not believe.
Trending Topics
#8
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: North Devon
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
It all depends what you want from the car and what your budget is. I have had a good few turbo's on my car including an SC GT3076 it is a very good turbo but is not in the same league in terms of spool and top end power as the Owen Developments turbo's. The standars portion Owen turbo's have been proven in a good number of sprint cars as well as the rotated items. I have a custom M spec GT30 which spools like you would not believe.
Which turbo are you reffering to the Fp Red etc !! I was looking at the new Blue What do yo think ?
http://www.forcedperformance.net/mer...Code=WRX-Turbo
#16
Scooby Regular
iTrader: (31)
Surprised no one has mentioned the precision turbo. Garunteed to make you figure with good spool to boot.
I've seen a lot of sc46 hardly make 460 tbh, some make good number yeah but not often, especially coupled with the smaller engine that it was designed for. Was designed for a 2.5, but again I've seen decent spool on the 2.1 but again not sure if the drive is great.
Also I'd look at the mdx321V and I believe there is also a motorsport version which will make 500+ easy but not seen one yet to confirm, mario is having his fitted soon so looking forward to his results
I've seen a lot of sc46 hardly make 460 tbh, some make good number yeah but not often, especially coupled with the smaller engine that it was designed for. Was designed for a 2.5, but again I've seen decent spool on the 2.1 but again not sure if the drive is great.
Also I'd look at the mdx321V and I believe there is also a motorsport version which will make 500+ easy but not seen one yet to confirm, mario is having his fitted soon so looking forward to his results
#23
Scooby Regular
iTrader: (31)
Tbh imo only, the more I searched on the 2.0 sc46, non of them really superseded the 460 marker and if they did it was with meth or high boost with lag also, even 'some' of the 2.1s hardly got there without extras, but there is a small handful that have made decent figures, suppose all engines are different to one another.
You fitted yours etc and running? Just map to do?
#24
Scooby Regular
iTrader: (2)
That does look like a fresh one with the black front, think it was the older ones.
Tbh imo only, the more I searched on the 2.0 sc46, non of them really superseded the 460 marker and if they did it was with meth or high boost with lag also, even 'some' of the 2.1s hardly got there without extras, but there is a small handful that have made decent figures, suppose all engines are different to one another.
You fitted yours etc and running? Just map to do?
Tbh imo only, the more I searched on the 2.0 sc46, non of them really superseded the 460 marker and if they did it was with meth or high boost with lag also, even 'some' of the 2.1s hardly got there without extras, but there is a small handful that have made decent figures, suppose all engines are different to one another.
You fitted yours etc and running? Just map to do?
#25
Scooby Regular
iTrader: (31)
yeah got it middle of Last year.on my old 2.0 engine it made 421 with 1.75 bar and full boost at 4K. I'm in on Thursday for a new map on my 2.1 engine now. There was a few weak links before that I've changed so hopefully it will be decent now. The 421 map was with standard recirc valve and think the diaphragm was passing I got a hks now, cat back reduced to 2.5 on the boss to downpipe so changed to revolution 3". Also gone for a hard intake pipe with a rcm induction kit instead of the Perrin foam one. Just done the surefire coils too so hopefully ironed out all the weak bits. I had the supertech valve train done on the engine too. Il post a graph once it's done
Now I'm aiming lower and expect more
Last edited by bustaMOVEs; 13 February 2017 at 09:10 PM.
#26
Scooby Regular
iTrader: (2)
Cool, look forward to it, but imo don't get your hopes up, set yourself lower to avoid diss appointment and then when you do make more that will be more thrilling. Trust me I was upset when mine didn't make target figure, but then again found out eventually I had warped a head that just showed up more as time went on, after all the tweaking I did to address stuff. (So my escaping combustion lost me a bit of hp).
Now I'm aiming lower and expect more
Now I'm aiming lower and expect more
#27
Scooby Regular
iTrader: (13)
Join Date: Jul 2007
Location: Newcastle Upon Tyne
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Surprised no one has mentioned the precision turbo. Garunteed to make you figure with good spool to boot.
I've seen a lot of sc46 hardly make 460 tbh, some make good number yeah but not often, especially coupled with the smaller engine that it was designed for. Was designed for a 2.5, but again I've seen decent spool on the 2.1 but again not sure if the drive is great.
Also I'd look at the mdx321V and I believe there is also a motorsport version which will make 500+ easy but not seen one yet to confirm, mario is having his fitted soon so looking forward to his results
I've seen a lot of sc46 hardly make 460 tbh, some make good number yeah but not often, especially coupled with the smaller engine that it was designed for. Was designed for a 2.5, but again I've seen decent spool on the 2.1 but again not sure if the drive is great.
Also I'd look at the mdx321V and I believe there is also a motorsport version which will make 500+ easy but not seen one yet to confirm, mario is having his fitted soon so looking forward to his results
I have a Turbo Dynamics MDX555-450 on my current build (2.5) and it made 474bhp & 483 ft/lb - the Lateral MDX321T would make similar power.
The Precision Turbos are a very good shout too - couple of the guys up here have them and on a 2.1 stroker made 472bhp
#28
Scooby Regular
iTrader: (31)
Indeed I am - Mapping 2nd March on a Lateral MDX321V+ ....hoping to ease into the 500's comfortably...but we'll see if that happens!
I have a Turbo Dynamics MDX555-450 on my current build (2.5) and it made 474bhp & 483 ft/lb - the Lateral MDX321T would make similar power.
The Precision Turbos are a very good shout too - couple of the guys up here have them and on a 2.1 stroker made 472bhp
I have a Turbo Dynamics MDX555-450 on my current build (2.5) and it made 474bhp & 483 ft/lb - the Lateral MDX321T would make similar power.
The Precision Turbos are a very good shout too - couple of the guys up here have them and on a 2.1 stroker made 472bhp
I bet them precision are on about 1.6/1.7bar to make above figure?
#29
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2005
Location: North Devon
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Indeed I am - Mapping 2nd March on a Lateral MDX321V+ ....hoping to ease into the 500's comfortably...but we'll see if that happens!
I have a Turbo Dynamics MDX555-450 on my current build (2.5) and it made 474bhp & 483 ft/lb - the Lateral MDX321T would make similar power.
The Precision Turbos are a very good shout too - couple of the guys up here have them and on a 2.1 stroker made 472bhp
I have a Turbo Dynamics MDX555-450 on my current build (2.5) and it made 474bhp & 483 ft/lb - the Lateral MDX321T would make similar power.
The Precision Turbos are a very good shout too - couple of the guys up here have them and on a 2.1 stroker made 472bhp
#30
Scooby Regular
iTrader: (13)
Join Date: Jul 2007
Location: Newcastle Upon Tyne
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
MDX555-450 made 474bhp & 483 ft/lb @ 1.65 bar (on my 2.5)
My friend's 2.1 stroker made 471bhp & 415 ft/lb @ 1.65 bar with the Precision Turbo
This is the Precision Turbo he has:
http://www.precisionturbo.net/turboc...--Forester/547