96 STI four door - loads of high quality parts.
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
96 STI four door - loads of high quality parts.
Open to offers on all parts listed.
----------------CAR SOLD-----------------
----------------CAR SOLD-----------------
----------------CAR SOLD-----------------
----------------CAR SOLD-----------------
Brand New Engine from Engine Tuner Plymouth UK -Closed deck block-
2.1 Litre with 2.5 crank, Cosworth Pistons, Competition Spec Bearings, Cosworth Head Gaskets, RCM Oil pump - costing over 5k (heads supplied additionally). Completed 860 miles only, 800 were on the road to run in.
Cost 5K looking for £3.5k
Clutch is Excedy Hyper Compe-R and is new - only done one race! cost £1,500 from Lateral looking for £800
Roger Clarke exhaust manifold stainless steel £200 - SOLD -
Up pipe stainless steel - £50 - SOLD -
Whiteline anti-roll bars front and rear both 22mm - £120 for both with free delivery
Flocked dashboard £100
Polished intake manifold £100
Air filter intake hose - Sparco cost £200 massive K and N air filter £70 selling both for £100
SC46 Turbo less than six months old bought brand new from Scooby Clinic cost £1,500 would like £800 - loads of interest in turbo will only take asking price thanks - SOLD
Simtek ECU. cost £1,000 with map will take £300 SOLD
Custom full stainless exhaust sound level of 98db. £250 will need mod to go on standard
Tein Super Racing suspension costing £1,800 + VAT will take £1,000 (no vat)
PPG five speed gearbox also from Scooby Clinic cost £4k and you will need the rear diff to go with it £1,500 for both
Chassis is a 96 imported STI and was fitted 2 years ago with a Full Weld in Cage, this was fitted to FIA standard and is certified. £3k
Windows in doors and rear window are Polycarbonate. £200
Eight pot front and six pot rear "K" Sport brakes 18 months old cost over 3k want £1,500 for both front and rear.
Fuel system has dual high pressure pumps with swirl pot, SOLD
The fuel rail is custom stainless 8mm a "one off" giving huge and reliable fuel delivery SOLD
The 960 injectors are modified "V" spray from Lateral Performance. £300 !!!DROPPED PRICE!!!
I have two sets of wheels both 17 inch one set is 7.5 inch wide with Bridgestone racing wet tyres (tyres approx £200 each new) and the other set are only 6 months old again 17 inch but 9 inches wide with Bridgestone racing slick tyres. (9x17 wheels sold)
Please note the new black wheels has a small amount of damage to the lip on one of the rims this was done whilst moving the car in the garage not on the track and has not affected the balance.
There are many other upgraded parts including a front mount intercooler, Sparco seats x2 in red SOLD polished intake manifold, bespoke breather system, full FIA fire extinguisher, light weight battery, braded internal fuel lines, custom rear spoiler, custom rear diffuser, custom front diffuser, carbon fibre front door cards, 25mm wheel spacers.
Prosport Gauges -
The gauges are prosport premium 52mm with blue light (red warning) they consist of one Turbo Pressure, one Oil pressure and one Oil Temp
cost a little over £400 (with delivery and import tax) -SOLD-
Loads of other parts if i haven't listed it just ask.
----------------CAR SOLD-----------------
----------------CAR SOLD-----------------
----------------CAR SOLD-----------------
----------------CAR SOLD-----------------
Brand New Engine from Engine Tuner Plymouth UK -Closed deck block-
2.1 Litre with 2.5 crank, Cosworth Pistons, Competition Spec Bearings, Cosworth Head Gaskets, RCM Oil pump - costing over 5k (heads supplied additionally). Completed 860 miles only, 800 were on the road to run in.
Cost 5K looking for £3.5k
Clutch is Excedy Hyper Compe-R and is new - only done one race! cost £1,500 from Lateral looking for £800
Roger Clarke exhaust manifold stainless steel £200 - SOLD -
Up pipe stainless steel - £50 - SOLD -
Whiteline anti-roll bars front and rear both 22mm - £120 for both with free delivery
Flocked dashboard £100
Polished intake manifold £100
Air filter intake hose - Sparco cost £200 massive K and N air filter £70 selling both for £100
SC46 Turbo less than six months old bought brand new from Scooby Clinic cost £1,500 would like £800 - loads of interest in turbo will only take asking price thanks - SOLD
Simtek ECU. cost £1,000 with map will take £300 SOLD
Custom full stainless exhaust sound level of 98db. £250 will need mod to go on standard
Tein Super Racing suspension costing £1,800 + VAT will take £1,000 (no vat)
PPG five speed gearbox also from Scooby Clinic cost £4k and you will need the rear diff to go with it £1,500 for both
Chassis is a 96 imported STI and was fitted 2 years ago with a Full Weld in Cage, this was fitted to FIA standard and is certified. £3k
Windows in doors and rear window are Polycarbonate. £200
Eight pot front and six pot rear "K" Sport brakes 18 months old cost over 3k want £1,500 for both front and rear.
Fuel system has dual high pressure pumps with swirl pot, SOLD
The fuel rail is custom stainless 8mm a "one off" giving huge and reliable fuel delivery SOLD
The 960 injectors are modified "V" spray from Lateral Performance. £300 !!!DROPPED PRICE!!!
I have two sets of wheels both 17 inch one set is 7.5 inch wide with Bridgestone racing wet tyres (tyres approx £200 each new) and the other set are only 6 months old again 17 inch but 9 inches wide with Bridgestone racing slick tyres. (9x17 wheels sold)
Please note the new black wheels has a small amount of damage to the lip on one of the rims this was done whilst moving the car in the garage not on the track and has not affected the balance.
There are many other upgraded parts including a front mount intercooler, Sparco seats x2 in red SOLD polished intake manifold, bespoke breather system, full FIA fire extinguisher, light weight battery, braded internal fuel lines, custom rear spoiler, custom rear diffuser, custom front diffuser, carbon fibre front door cards, 25mm wheel spacers.
Prosport Gauges -
The gauges are prosport premium 52mm with blue light (red warning) they consist of one Turbo Pressure, one Oil pressure and one Oil Temp
cost a little over £400 (with delivery and import tax) -SOLD-
Loads of other parts if i haven't listed it just ask.
Last edited by Spencernumber6; 26 March 2012 at 07:25 AM. Reason: Car Sold
#5
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
The exhaust will be included with the chassis (no extra charge)
I will get some more photo's to illustrate.
Trending Topics
#10
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Contacted Scooby clinic to ask if they can confirm when i bought it as I can't find the receipt they said they can only go back three months, i called Trition Motorsport in Christchurch as they fitted it and they can confirm it was fitted in August i also asked if the Simtek will go in a new age and they have said it won't.
#13
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
The spoiler is bespoke made of alley and painted with two pack paint
Fire £ 200
Rear Spolier £ 150
#15
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Hello mate, the front and rear diffusers were made by my fair hands.
They are not pretty items more function than looks and they have been used on the track so they have been knocked about.
The front is made if aircraft grade honeycomb aluminium and the rear is made of a sandwich material thin ally covering a hard plastic.
Dont think they are really worth much but when the car goes into the garage and gets stripped of all my lovely bits you could have them foc, if you arrange a courier or pick up.
I will take a couple of picks and add in a day or so.
They are not pretty items more function than looks and they have been used on the track so they have been knocked about.
The front is made if aircraft grade honeycomb aluminium and the rear is made of a sandwich material thin ally covering a hard plastic.
Dont think they are really worth much but when the car goes into the garage and gets stripped of all my lovely bits you could have them foc, if you arrange a courier or pick up.
I will take a couple of picks and add in a day or so.
#22
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
#27
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
#28
Scooby Newbie
Thread Starter
Join Date: Dec 2011
Location: christchurch
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Up pipe is available extra £50.
The picture shown is the manifold the day it was fitted, as soon as it was warm it lost its shine and heat changed the colour, also it was then fitted with heat wrap. Yes its RCM
Last edited by Spencernumber6; 11 March 2012 at 09:55 AM. Reason: Spelling!