Defi Advance BF gauges & controller
25 May 2012, 02:54 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2007
Posts: 3,013
Likes: 0
Received 0 Likes
on
0 Posts
Defi Advance BF gauges & controller
60mm Defi Advance BF boost, oil pressure and oil temperature gauges, in blue, with sensors, all connections and the Control Unit II along with a couple of spare wires for additional gauges - essentially everything you need to have them working.
In the unlikely event that anyone is unfamiliar with the gauges, information can be found here.
Boost reads -1 to 2.0 bar, Oil Pressure reads 0 to 10 and Oil Temp. reads in 50 to 150°C and are illuminated blue when switched on. Original packaging for the gauges and the cup mounts are long gone and so not included but I will include the original box for the controller and instruction manual.
There's a few light marks on the sides of the gauges themselves from being fitted but can't be seen when in place and the faces are completely unmarked and as new. The controller has quite a bit of glue residue on both the top and bottom of the casing which doesn't want to come off, however it is just aesthetic and could not be seen where I had it fitted (largely because it was holding the controller in place at the time). The controller and gauges all work perfectly as can be seen in the videos below.
I'm looking for £450 (plus any postage) for the lot, cash on collection preferred. I'm not willing to split at the moment.
When fitted (the pod is NOT included or available).
Controller.
Top
Bottom
Front
Sensors
A very badly shot video (apologies for that, but you get the idea)
Not pictured but recently found and so will be included, the original plastic T-piece for the boost gauge, it's unused as the sensor was fitted to the spare nipple when on my car.
I've probably overlooked something so any questions ask away, or contact me by PM.
In the unlikely event that anyone is unfamiliar with the gauges, information can be found here.
Boost reads -1 to 2.0 bar, Oil Pressure reads 0 to 10 and Oil Temp. reads in 50 to 150°C and are illuminated blue when switched on. Original packaging for the gauges and the cup mounts are long gone and so not included but I will include the original box for the controller and instruction manual.
There's a few light marks on the sides of the gauges themselves from being fitted but can't be seen when in place and the faces are completely unmarked and as new. The controller has quite a bit of glue residue on both the top and bottom of the casing which doesn't want to come off, however it is just aesthetic and could not be seen where I had it fitted (largely because it was holding the controller in place at the time). The controller and gauges all work perfectly as can be seen in the videos below.
I'm looking for £450 (plus any postage) for the lot, cash on collection preferred. I'm not willing to split at the moment.
When fitted (the pod is NOT included or available).
Controller.
Top
Bottom
Front
Sensors
A very badly shot video (apologies for that, but you get the idea)
Not pictured but recently found and so will be included, the original plastic T-piece for the boost gauge, it's unused as the sensor was fitted to the spare nipple when on my car.
I've probably overlooked something so any questions ask away, or contact me by PM.
Last edited by ilogikal1; 25 May 2012 at 02:56 PM.
26 May 2012, 08:35 PM
#5
Scooby Regular
Thread Starter
Join Date: Jul 2007
Posts: 3,013
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post