anyonewilldo

Hi all , I've been working with carbon fibre and fibreglass for the last 12 years or more and was wondering if anybody would be interested in any of the above with either a gel coat finish in white so easily painted or carbon fibre

Pretty much anything on the market that is made either from fibreglass or carbon fibre I can make so show a bit of interest peeps and il get this on the move so we ain't all paying through the nose !

The bits will be made to order and if I'v not done that particular bit before I will need to make a mould first so the wait would be slightly longer say 7-10 days but if I already have a mould made for that particular part the wait would be 3-4 days delivered to your door

PayPal would be preferred (safe for everyone) or cash on collection

tweaks

iTrader: (7)

Reverse bonnet vent same as rcm for facelift classic ?

Tim

need4speeduk

iTrader: (26)

I'd be interested in some wide arch 22b wings. I have a spare pair you could use as a mould. They're in fiberglass. also a classic boot. Price dependent obviously.

anyonewilldo

Need4speed that sounds great did you want the wings in carbon fibre ? Boot aswell Carbon fibre ? If you was to give us your wings to make a mould I'd do you a set of wings for next to nothing

I'm not great on prices so if someone could give me a rough figure what some fair prices would be il get to work !

And could do a reverse scoop for any model tim ! Il get my hands on a few for different models and knock them up ! again not sure on a fair price will have to look about and see what stuff is selling for on eBay and so on unless again people can come up with some fair prices

I'm hoping to be able to make a modist living off this eventually as at the minute I get paid a stupid amount of money but I have to work away and the misses is not keen on me being away in London for 2 weeks at a time and only being home for a weekend then back again and to top it off I'v just had twins lol

anyonewilldo

What I may do aswell is to see the mods and see if they fancy doing a few competitions (picture of the month) or something like that and give away a couple of bits as prizes to get my stuff out there so people can see the quality and so on

X70cky

iTrader: (11)

I'd like a reverse scoop to fit a bugeye bonnet.....would you make the scoop to fit into the existing hole in the bonnet? As I've seen a few the don't fit and sit over the the hole in the bonnet.......let me know fella

anyonewilldo

Il try see if I can get hold of on mate I'm lOoking all over now ! I know what you mean tho by sitting in the hole

cjquicksilver

iTrader: (23)

22b spoiler in carbon ?

dc911

I would be defo interested in a carbon reverse scoop like rcms for a classic asap too

Arch

iTrader: (59)

following for me
Classic reverse vent same as RCM pre facelift classic
22b front wings
boot

cjquicksilver

iTrader: (23)

Or any 22b spoiler tbh

need4speeduk

iTrader: (26)

Sounds like a plan. I'll be in touch over the weekend.

anyonewilldo

Bloody hell ! Been looking on eBay at the prices charged for some carbon bits it's robbery for some of it lol !

Carbon boot £650 - 700
Spoiler £400-450
Bonnet £700-750
Wings £400-450
Scoops £200
I seen a rear bumper for £1299 lol

Now I know these aren't cheap to make with carbon but the mark up on these is astronomical lol

X70cky

iTrader: (11)

Nice 1 mate yeh am just interested in a reverse scoop that looks like the standard sti 1 spun round if possible......no carbon fibre as its to spray up ;0)

X70cky

iTrader: (11)

Just looking at a ARC Reverse scoop there.....it's half reverse then has a forward facing vent on the turbo side to cool the turbo off :0) now am liking them also fella ;0)

X70cky

iTrader: (11)

Abit like this 1 off eBay.......item no....110930950103

HI_JAC

iTrader: (7)

Interested in newage boot mate.

BHPvstorque

iTrader: (14)

Oooh you mentioned bumpers would so want to get hold of a carbon facelift classic rear bumper in carbon they are almost impossible to find or a front bumper i have a c-west one at the mo it is carbon covered looks good but not very light. Defo interested. Would go with my other carbon bits. Mind you saying that rcm reverse bonnet scoop also sound good. Blimey better start saving now......

anyonewilldo

I'm working On this lads ! Bought a few bits and bobs and the ball is swinging so please be patient as this was only an idea I had in the bath lol , I didnt think there would be this much interest or I would have been doing this along with working up to now !

anyonewilldo

I'm working On this lads ! Bought a few bits and bobs and the ball is swinging so please be patient as this was only an idea I had in the bath lol , I didnt think there would be this much interest or I would have been doing this along with working up to now !

Thanks for all the interest peeps hopefully we will all be happy !

nick!

iTrader: (4)

Where abouts are you?

Id like a few carbon bits but it is all price dependant!

Bealescooby

iTrader: (36)

All for classic

carbon boot
carbon facelift grill
carbon mid level spoiler

carbon interior dash pieces

carbon sideskirts????

also carbon number plate bumper insert for rear bumper seen them for newage not for classic

anyonewilldo

I live in Scunthorpe but work away in Twickenham !
I'v been buying up wings , scoops , bumpers , all sorts to get to work making the moulds so as soon as I'v got a few bits ready il post in here !

subzerokent

iTrader: (1)

I'd like bugeye wings and bumpers I have patterns if needed

anyonewilldo

Yeah that would be great subzerokent !

Arch

iTrader: (59)

One idea that may be of use to you given you are making the moulds is to offer the parts in either fibreglass or carbon fibre. That would cover the market for the guys who want the carbon look and also the guys who just want light weight parts.

Kwik

iTrader: (10)

Shop about a bit for prices though, japspeed do classic boots for £350
http://www.japspeed.co.uk/Subaru-Imp...d/p-23-74-547/

anyonewilldo

Right guys quick question on how people would prefer it to look !
Now I can make them so that you could see the carbon fibre weave on the outside so to look at it that would be what you would see but this would look ****e and chavvy to me and would be a lot tougher to get a nice finish visualy . I think a gel coat finish would be far better and easier sprayed to match car colour !
The panel would still be light weight and strong but would look a standard panel when sprayed but this is up to you really !

anyonewilldo

Arch that's my intention mate any mould once made will be offered in glass and carbon obviously the price will be different !

And thanks kwik I'm still undecided on price really

BHPvstorque

iTrader: (14)

Oooh that is a good on classic side skirts would also be very cool... Got offered some ages ago but did not have the money not seen any since in carbon....