forged 2.1 short block , sti 6 cylinder heads polished etc
#1
forged 2.1 short block , sti 6 cylinder heads polished etc
hi guys
some stuff from my last project , have now purchased a complete car already done as i didnt have the time tbh
anyways
t20c spec c block halves ( ej20 ) bored and honed +0.5mm
cosworth 2.1 stroker pistons
carillo h section rods
ej25 sti crank
acl race bearings
all new bolt and seal kit
short block is built and ready to go , i also have , sump , pickup , baffle , crossover pipe and modene also to go with , all it really needs is a water pump and oil pump of your choice
the block has done 0 miles and is a new build , all casings etc have been dipped / cleaned etc , block faces are nice and flat and clean ( have been decked / skimmed lightly in the past )
£1800 delivered
sti6 cylinder heads with yellow powder coated cam covers
inlet side has had a mild port and is highly polished
cams etc are in super condition and look almost new
heads are complete
£280
or both together for £2000
some stuff from my last project , have now purchased a complete car already done as i didnt have the time tbh
anyways
t20c spec c block halves ( ej20 ) bored and honed +0.5mm
cosworth 2.1 stroker pistons
carillo h section rods
ej25 sti crank
acl race bearings
all new bolt and seal kit
short block is built and ready to go , i also have , sump , pickup , baffle , crossover pipe and modene also to go with , all it really needs is a water pump and oil pump of your choice
the block has done 0 miles and is a new build , all casings etc have been dipped / cleaned etc , block faces are nice and flat and clean ( have been decked / skimmed lightly in the past )
£1800 delivered
sti6 cylinder heads with yellow powder coated cam covers
inlet side has had a mild port and is highly polished
cams etc are in super condition and look almost new
heads are complete
£280
or both together for £2000
Last edited by BRAVEHEART_STI; 02 November 2012 at 12:04 PM.
Trending Topics
#9
Couple of things that may help is who built the engine? And in your opinion what will the engine take at that spec?
Never seen a 2.0 converted to a 2.2, nice idea that surely it will have close characteristics to a 2.35 but much cheaper to build.
Best of luck with the sale, if it was nearer to may next year I would of been very interested just the car is under warranty.
Good luck mate, seems a steal at that price
Never seen a 2.0 converted to a 2.2, nice idea that surely it will have close characteristics to a 2.35 but much cheaper to build.
Best of luck with the sale, if it was nearer to may next year I would of been very interested just the car is under warranty.
Good luck mate, seems a steal at that price
#13
it does sound better but in all respect they do list a 2.1 piston also
ive noticed the dome design is different on the 2.1 vs 2.2
the 2.1 stroker kits mostly use the square design dish
the 2.2 uses a valve cut out on the square part
for example
2.1 pistons
and 2.2 piston
Last edited by BRAVEHEART_STI; 02 November 2012 at 10:45 AM.
#14
Scooby Senior
iTrader: (68)
They are classic block pistons with the flat dish no valve cut and newage block pistons with valve cut
http://www.performanceenginecomponen...partmentid=712
http://www.performanceenginecomponen...partmentid=712
#16
i believe newage with valve cutout has circular domes
theres a few distributors that sell both 2.1 and 2.2 kits both for ej20 so really couldnt tell u and can only go by part numbers
sureley companys cannot advertise as 2.2 and sell 2.1 kits at the same time
theres a few distributors that sell both 2.1 and 2.2 kits both for ej20 so really couldnt tell u and can only go by part numbers
sureley companys cannot advertise as 2.2 and sell 2.1 kits at the same time