Prodrive vs Whiteline geometry settings
#1
Scooby Regular
Thread Starter
Join Date: Jul 2001
Location: Telemark, Norway
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Prodrive recommend 1 mm front/rear total toe in. Whiteline recommend 0 mm front and 1 mm rear toe out. What?! My goal is to reduce understeer and make the car more "tail happy". I can't see how the Prodrive settings can improve ANYTHING at all?
#2
I've set the following : Camber max negative front and rear, for the tracking I used before something like the Whiteline setting : -0°5' front and +1' on the rear, that makes the car very tricky on camber changes and powering out of a corner, remember we are road drivers not WRC pilots.
I use now camber settings as above + anti lift kit + toe-in front and rear ( about 2° ), now I can corner and slide over the four wheels equal = very safe. No understeer, just when you abuse the throttle, and good roadholding on wet and tricky cambers...
Mail me for more info....
cheers, Wally
I use now camber settings as above + anti lift kit + toe-in front and rear ( about 2° ), now I can corner and slide over the four wheels equal = very safe. No understeer, just when you abuse the throttle, and good roadholding on wet and tricky cambers...
Mail me for more info....
cheers, Wally
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
johnnybon
Wheels And Tyres For Sale
7
25 September 2015 07:49 AM